Search results

  1. mathewbeall

    Parts I used for Blade's Rpi Loader for Namco 2x6

    tagging @electric_monk - i am sure he has the same supply issues as everyone else right now. I also realized I messed up on the picture - the usb thumbdrive plugs right into the front panel - no cable required - I will fix.
  2. mathewbeall

    Parts I used for Blade's Rpi Loader for Namco 2x6

    Here is a quick visual of where things plug in.
  3. mathewbeall

    WTB: Killer Instinct 1 or 2 working pcb

    Link for you https://forums.arcade-museum.com/threads/killer-instinct-1-dual-boot-pcb-play-ki1-or-ki2-with-the-flip-of-a-switch.508980/#post-4533959
  4. mathewbeall

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Go into "Netdimm setup (control?)" under the Setup menu and make sure the checkbox for your netdimm is checked for "openjvs". Matt
  5. mathewbeall

    JasensCustoms - CPS1 Multi Case Thread

    Got my order in for 2! Very excited to show off the "Triumverate" :)
  6. mathewbeall

    Sega Naomi2 - Initial D3 - WiPi - Sega FFB Controller Pro (Aganyte)

    Although - I tested more - and *think* that the FFB is reversed on ID3 - it rumbles when I am going straight down the road, and when I slide into a corner, its smooth. Waiting for a buddy to test out his wheel on his system (its different from mine). Also posted over on gamoover as well. Matt
  7. mathewbeall

    Sega Naomi2 - Initial D3 - WiPi - Sega FFB Controller Pro (Aganyte)

    ok - so I think i got this working. I used the "ArcadeFFB_to_pc" .hex file, and wired up the MIDI to the midi inputs on the board, and it seems like it works. I need a friend to come over who really knows InitialD3 to tell me if the force feedback is right, but it feels right. For those who...
  8. mathewbeall

    Sega Naomi2 - Initial D3 - WiPi - Sega FFB Controller Pro (Aganyte)

    Tagging @Fredobedo007 - I read through all 40 pages on the french site, and besides your one post about getting this done - nothing there for me to latch onto. I think I am just stuck not understanding which of these to program my FFB-Pro card with - I have probably tried half of them. I...
  9. mathewbeall

    Sega Naomi2 - Initial D3 - WiPi - Sega FFB Controller Pro (Aganyte)

    I am wondering if I have to use a straight through DB9 off the OpenJVS hat to connect to the DB9 on the Sega FFB controller? Let me try that. I don't have a male to male db9 straight through - arrives on Monday - I will report back then. Unless anyone has any better ideas for how it should...
  10. mathewbeall

    Sega Naomi2 - Initial D3 - WiPi - Sega FFB Controller Pro (Aganyte)

    @bobbydilley responded - it looks like the two DO play nicely together. https://github.com/Fredobedo/openFFB Now I just have to figure out how I get CN2 on the Naomi connected over to the Sega FFB board. I tried pins 1,2 and 4,5 over to MIDI RX+/- and TX+/- on the board, and every combination...
  11. mathewbeall

    Sega Naomi2 - Initial D3 - WiPi - Sega FFB Controller Pro (Aganyte)

    Hello All - I have spent about 3 hours this afternoon reading and looking around, and I need some help. According to the latest WiPi notes - OpenFFB adds support for Aganyte’s Sega FFB (Force Feedback) Controller board, the software has been kindly provided by FredoBedo. Does not work with...
  12. mathewbeall

    CPS1 Multi. Official Thread

    There are a few that I have seen. The one I am tracking the most is the upcoming CPS1 case from JasenHicks. https://jasenscustomsarchive.com/product/capcom-cps1-arcade-pcb-case/ Matt
  13. mathewbeall

    SOLD: Sencore CR70 "Beam Builder" CRT Analyzer and Restorer

    Crazy story - I bought one of these exact models back in 2018 - thinking I would learn how to use it and it would help restore some of my tubes. I never got around to it - because someone walked into my garage one day (i was working in it, but had gone inside for a few minutes) and they ran in...
  14. mathewbeall

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    I have never tried it with a pi1, just 3 and above. Are you able to log into it and see if it even sees the usb wifi adapter? Matt
  15. mathewbeall

    Namco 246 Jamma pcb working I/O board

    I sent a PM.
  16. mathewbeall

    New CPSIII Ultra Simms! 8 times the size of a regular SIMM

    You need the NO CD version if you don't intend to have any CD or SCSI2SD hooked up. You still need to load the game though (using some sort of CD/SCSI2SD), but then once the SIMMS have the code - and you are using the noCD ultrabios - it should work fine. Matt
  17. mathewbeall

    WiFi alternative to the CPS1 (CPS2/Taito F3) selector box

    If no one is working on it - it would be a fun project for me to take up. Seems like it would be fairly simple.
  18. mathewbeall

    WiFi alternative to the CPS1 (CPS2/Taito F3) selector box

    Hi Folks! Has anyone thought about or worked out a small wifi module (I am thinking ESP286 or Photon) that would serve up a simple selection page to allow changing the CPS1 or CPS2 game and not need to open a cabinet up? Matt
  19. mathewbeall

    Wanted: two (2) Sega NAOMI CF cards, imaged/tested, in the US

    I will just charge for the cost of the CF card and $10 for USPS shipping. I think the CF cards were $12 a pop when I got them. I'll check.
  20. mathewbeall

    Wanted: two (2) Sega NAOMI CF cards, imaged/tested, in the US

    Howdy - I can get these setup and sent over to you. I should have (2) CF cards as well. I can load up InitialD3 on them and test it before sending over to you. I should be able to get it done on this weekend - does that work? Matt
Top