Search results

Good stuff. I ended up masking off the instruction glass and used a paint pen freehand and got pretty good results. But I need to do my Astro instruction glass so I might try your method. I also tried to sand down a Blast CP box and got pretty horrible results. Also the stains on mine were so...

In for 2 43mm shipped to SoCal.

Road trip! I'm interested in at least 4.

Looks so great. Not sure where I’d put it, but if I get another cab this is what I’d want.

https://www.amazon.com/gp/product/B07XJRJ8B1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1&psc=1 I went with the NON-gel, 51mm. They are the same size as the default and not so soft where they will sag over time.

This cab is looking great.

Also PM'd.

It’s got all the colors. Probably a good tube. Geometry even looks nice. Your seller is a hero too. Sorry to scare you, Blast City cabs are fickle creatures. It’s probably my favorite cab, but a good one is hard to come by.

Beautiful. You can dial that in.

Mine was missing red. And my tube had to be replaced.

I'd almost be worried it has no green. Have the seller at least pull up a RGB test image so you can confirm each color on the tube is good.

I just went on an adventure to make all the screws in both my Astro City's the same as stated in the Sega manual. Astro City Manual (日本語） New Astro City Manual (English) The (3) Front Panel screws inside the control panel are: M5 x 16mm with washers. The Fluorescent Lamp Lid has (5) M4 x 10mm...

I'm curious about this too. My Blast had two locks in it when I got it and they were A001. I am also about to make some more PCB mounting boards so thanks for the info @Kidkaos and @tDRG.

Looks amazing

I’ve gotten multiple sets from https://www.ebay.com/usr/seiiseiiseii2000. They are great quality.

I've done a few updates to my Astro City in the past couple of months. I had wanted to put skate wheels on for awhile since seeing a few other forum members do so. You do need to file them down otherwise they won't spin nice. Also, my Astro didn't have the casters at all when I got it. So...

Got my ZuluSCSI yesterday. The install is incredibly easy. These were my steps: Use ImgBurn to create a .iso of my CPS3 Multi disc Plug SD card into my card reader Make sure the SD card was formatted correctly Drag my CPS Multi disc iso into the folder of the SD card (card connected via a SD...

I just got a CPS3. FML. I ordered this newer drive replacement. I’ll post when I get it.

Definitely gotten some cables from you. Good stuff.

Arcadepartsandrepair is where I ordered the cap kit. Fan is a Noctua A8.