Search results

  1. DCrosby

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    The Serial would only be for the card reader to send serial data to the Naomi's card reader interface for things like InitialD, which has a card reader that operates on serial protocol... I think for this it just reads the card, identifies which game is intended to be loaded and loads it, has...
  2. DCrosby

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    I was going to ask and I scrolled back a page or two, to look but I don't know if this was already done, or is still being worked on, but at some point there was talk about being able to set/save settings for freeplay and attract mode sound, and when switching from game to game to have that be...
  3. DCrosby

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    The reader is for Ras-Pi, and not for a specific naomi / system, I don't want to speak out of turn but it would be sensible to expect this to work with Triforce and Chihiro as well...
  4. DCrosby

    Consolized Naomi 1/2

    Speaking of Fish Life, is it possible (I know time and or money) but has anybody attempted to port Fish Life to Naomi?
  5. DCrosby

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    Sorry My Mistake, I haven't dealt with ID8, Just the Naomi 1-2 sorry!
  6. DCrosby

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    The cards are easy enough to purchase in bulk, and you could make a design for the arcade, or take a sticker printer with a logo or something for the top with the name and a picture for people who want a card, maybe some way to build loyalty to your arcade? These are the ones I purchased and...
  7. DCrosby

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    For Operating them or for home use? For home use, I'd use a ras-pi and make RF Tags for everybody in the house / friends, for commercial operation, I wouldn't know what's involved with why your cards don't work, even so I would imagine there'd be a limit to the number of cards you have... so how...
  8. DCrosby

    Looking for a good solution for a CPS1 + CPS2 + CPS3 Switcher Board.

    I have the CPS1, 2, and 3 Dark-soft Boards, the question now is with CPS1 being both Mono (Jamma) and Stereo->QSound, If I wanted to take a Big Blue, and have a Jamma Switcher, how would I set that up as far as Jamma, Kick Harness, and Line Level Audio (Qsound) so I could play whatever board /...
  9. DCrosby

    3D printed case for CPS3 cart (remix of Twistedsymphony awesome work)

    Got my Repro Cart today, and it fit like a glove... very nice!
  10. DCrosby

    3D printed case for CPS3 cart (remix of Twistedsymphony awesome work)

    So they Seem to fit together fine, the piece that's supposed to fall off to accommodate the screw, I think having some kind of recessed Hole would make that easier, as when it broke off it wasn't all that level... and the fact that once is breaks off it's kind of rough (texture wise) so overall...
  11. DCrosby

    3D printed case for CPS3 cart (remix of Twistedsymphony awesome work)

    Started Printing the case front, the back with the fixes is now "in the oven" :D I'll take some pics of that when done, both done on Prusa i3 Mk3
  12. DCrosby

    CPS1 Multi - Support thread

    OH.... It's on the board, and not on the display? That's why that threw me...
  13. DCrosby

    CPS1 Multi - Support thread

    Same, if you're closer to the San Fernando Valley, you can bring it by my place... I'll do it for free... PM Me... Back When I had something difficult to do, that I wasn't capable of doing, I found a TV Repair shop and they charged me $10-$15 about 5-10 years ago, and they handled it for me...
  14. DCrosby

    Fast I/O PCBs

    I have a K91X1243A as well, and would be interested in anybody getting 6 buttons working, also was wondering if someone had tried every pin or explored if it just needed a different harness.. I know the New-Net-City cabs have a pin for button 5 Both on the main plug as well as on the "Kick...
  15. DCrosby

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    Ok, that was supposed to work, by going to manual and then activating the card, but I was able to set it to manual but as to the "Docs/Manual" For Mario Cart and F-Zero you have to create an empty card, which then launches the emulator, and it started working... so yes reading the docs closely...
  16. DCrosby

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    Yeah because the battery works, I don't always upload the Wi-Pi, I was thinking if I go into setup and then manually go to the card page for Mario 2 it would work also, but I'm not sure how to manually fire the card reader, I have to go through the docs again... :)
  17. DCrosby

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    So in the first cable with 3 Wires I had the sides reversed... but looking at the picture and where pins reside on your connector, and where they are in the diagram, I figured it out, but it still doesn't want to work... I know the wire colors are different because of the cable manufacturers...
  18. DCrosby

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    Ok, that didn't work, still same error... it won't communicate through the Game Test or the Game Initialization. @whatnot When you say bridging you mean merging the pins for RTS / CTS to one pin, which one? Looking online about bridging RTS/CTS isn't that what this does? Pin 6 (RTS) - Pin 8...
  19. DCrosby

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    Looking at running Mario Cart 1&2 and F-Zero I found an 8 Pin connector among my parts bin, and de-pinned the connector, and was able to move the pins over, added the two extra pins, and we'll see tomorrow if it works, thanks @mathewbeall !
  20. DCrosby

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    So on the triforce, it's not happy, I have a triforce type1 and I follwed the instructions just 3 pins Ground RXD and TXD and no go on Mario Cart 2, I have to try mario cart 1 but for some odd reason the trifoce doesn't always show up on the WiPi ... maybe another SD card issue :P Am I missing a...
Top