Search results

Hi ! 11 boards ready to ship and all PM sent. More coming by the end of the month. Enjoy

If i remember well 4 are fully ready and 20 on the bench waiting for finalize & testing. I know it's a bit "slow" but i had many unexpected events recently. The good news is that i should deliver a lot in one batch.

Broken P1 chip. Look at the top pcb in the cart, and especially the chip marked P1. If you see some sort of "brown circle" in the middle" or cracks, they are burnt.

Where ?

I received missing parts yesterday. Some board may be ready soon.

Hi, They are some LEDs that can help you. Hereafter are some things to try or look at: When plugged in, a blue led should light on. No light ? check for power cable. The Arduino should blink for every message it gets from the motherboard (a message is not always associated to a sound). If...

I currently have 600dpi vinyl glossy sticker. They are precut, dimensions are 165*20mm so they fit any cart. Titles available, 1.5€/label: Aero Fighters 2 Band bead Blazing Star Captain Tomaday Double Dragon Ganryu Ghostlop Ironclad Kof2002 Last Hope Magician Lord Metal Slug Metal Slug 2...

I'might try something with STV.

There is no more problems with attract music and the scud race sound pack is already made. Wiring is dependent to the cab, not the game. You could switch between game by changing the romboard and the SD card.

Stock went away in less than a day, but i should have some soon, before end of July I hope. Subscribe to the topic so you get mailed when some are ready.

Let me know. I already have a lot of the printed but i can create and ask new one to be printed. Both the printman and I do the job for free, the money goes to an arcade association.

You have many types of vynil. Most common is glossy, but mat exists. This is a far better looking for MVS. One label = 1€50 + shipping, main cost will be shipping for sure.

Printed on vinyl with cut-out. The grey color is close to dark labels (ShockTroopers and NeoTurf for example), the length is designed to fit all cartridges (even short ones). Where are you from ? What titles do you need ?

I restocked few boards. First-come, first-served :D All sold Note: The shortage of components forced me to replace the 6pin connector by 2x3pins. In practice it's the same, still using the same original JST as on the SEGA board.

There: https://www.neo-arcadia.com/forum/viewtopic.php?f=9&t=71054#p1294786

Try diagbios too, and don't forget to check calendar from the menu.

Turn all dip switch on, then power on. You'll go into "Work ram test". Let it run for few seconds and then power off and switch dip back to off. See if it works. If it's repaired, ti was just backup ram corruption. Your issue may also be a real calendar error, but the buggy bios is not able to...

You take the right decision by stopping there if you estimate your skills are not high enough. Don't throw it in the bin and wait for someone to fix this. Arcade community is full of skilled people that can repair it.

If I earned a dollar each time I heard this kind of story, I would be rich today. At least you learned some things in the processing.

It looks like you are building a PC...