Search results

  1. XeD

    Cps digital in a cps3, no hdmi signal

    I am attempting to repair a cps digital install. I was not the original installer. When I have a hdmi cable plug in my TV does not get any video/audio. In my input select that hdmi port does not even activate. I have done the following: Removed and reinstall the cps digital (using original...
  2. XeD

    XeD's random repair log

    I need a Type 1 (837-13551-92) to do some testing and only had 2 broken type one. 1st type 1: Naomi did not recognize the io. Between this one the relay did not click like the other. Replace the 74VHC04 (ic8s pin 5 was stuck high) from the other io. Tested working 2nd type 1: Naomi did not...
  3. XeD

    Looking for 317-0314-COM file

    I am am looking for said file so I can burn a key. Are the files out there somewhere?
  4. XeD

    Naomi 1 01 error help. Fixed was a bad via

    I have a Naomi that is giving me a 01 error on my working test cart (work on my other N1) the pin look good and plugging it in on the bottom side also give me the same error so I don't think it's pin related. Has anyone seen this before?
  5. XeD

    Type X+ video card, question

    I have a friend that need a new video card. Do they have special bios like the X2 and what is consider the best/most compatible with most games. We are trying to get battle gear 4 going again.
  6. XeD

    Are there any netdimm repair log?

    I have a net dimm that only boot some time. I have narrow it down to the main ram board. The network daughter board work on another netdimm. The bios and pic is also good. I also have another netdimm coming in from a friend in about month or 2 that give error code 22. It was working last year...
  7. XeD

    XeD random stuff. Asia Progear/MVS Viewpoint/Irritating Maze

    Going through some of stuff. I have an original Asia Progear B board with a crack case (600 USD). I removed the battery and install a pic to inject the code on boot. MVS viewpoint (300 USD). Had to replace the SI or MI ic. I will have to check on that later. Partial Irritating Maze (1000...
  8. XeD

    FS: DE10 nano (Sold out. Thank you everyone)

    Edit: Anything past this point, you will be put in a queue. If I don't receive payment from a pending order I will go down the list. Ok form is up. I will DM you with PayPal address. Will ship out anywhere from 1-2 week once payment has cleared. A reminder again this is in Canadian dollar. If...
  9. XeD

    Xed and Mirko repro Monkeyball banana and harness

    This is an interest post for some repro Monkey ball parts. This is a collaboration between Mirko and I. All prices are in USD and shipping is extra. We are hoping to ship late November. I will contact you for payment once they are ready to ship. I don’t want to do pre-order as we will loose on...
  10. XeD

    Need Killer Instinct pcb scan

    Hi, I have a KI that has a blown video ground most likely from pluging into a monitor with isolation. Can anyone take a clear picture of the video ground section by the jamma edge
  11. XeD

    FS/FT CPS3 multi

    For Sale 55.00 (3 5 available) - 128mb simm tested working by writing 3rd strike 50.00 (4 available) - 64mb simm tested working by writing 3rd strike If anyone in Canada that want to get their cart flash to the new Ultrabios (or any publicly available bios) I can do it for 50 CAD+Shipping Sold...
  12. XeD

    Does Sega I/O work on the X2?

    I'm helping a buddy setup his X2. He has a sega i/o a 838-13683-93 and -02. We can't seem to get the kicks working properly. He doesn't have a game for the naomi but in the jvs input test the register. On my end I only have a capcom io and that work. Is his sega io not compatible? He confirmed...
  13. XeD

    Yet another ms2930 question

    I have a MS2930 that work for the most part. With the dip on 15/24 kHz setting thing work find. Once it set to 31khz it goes to shut down. Any idea where to start?
  14. XeD

    MS2930 neck glow but no HV

    Any expert out there out familiar with the Ms2930,31,33 family of chassis? I have 2 MS2930 that have this problem. I have neck glow but no high voltage. Where do I start troubleshooting?
  15. XeD

    Is there any small lcd that can accept cga or vga?

    My psone screen finally died in my portable jamma test rig. Are their any other screen I can use for this? I have a gbs8220 if vga is the only option. Don't want to use another phone screen if there are other/better options
  16. XeD

    Any repair log or flow chart for sega SJ25-0361-01?

    I have 2 SJ25-0361-01 that is missing audio from 1 side. Any insight on where to start or the spec on the AC power so I can rig up a test fixture
  17. XeD

    CPS3 - Converting 32mb simm to 128mb simm with 29f016A-90PFN only

    For a better detail instruction have a look at Yavuzg tutorial Here. My English/grammar not the best so just bear with me. I am no expert by any mean, just some determination and some time to kill. (1) A working 32mb simm as a base. (6) 29f016A-90PFN possibility (8) just incase the bending of...
  18. XeD

    Is there a how to on c board patching?

    I'm looking to patch final fight 30th to use the CPS-B-17 C board so I can save the CPS-B-21 for HF. Is there a good how to on patching rom to use different c board
  19. XeD

    Looking for a dump of d77-15

    I'm asked to do a F3 conversion, but the donor board does not have the D77-15 pal. From my understanding i need the D77-15 to use the 4001 program rom. Does anyone have this file?
  20. XeD

    Where to buy 29f016?

    I have some spare 32mb simm I like to convert to 128mb. Is the a reliable source for the 29016 N ic? I need about 10