Search results

  1. djcalle

    Australian Roll Call / Registry / Deals Thread

    I got a DVDO iscan for the purpose of downscaling 480P to 240P, it was imported from the US, never got to using it. it is one of the ones recommended on the shmups forum. Hit me up if interested mate.
  2. djcalle

    Australian Roll Call / Registry / Deals Thread

    Anyone selling a Super Street Fighter 2 Turbo CPS2 A+B combo? Region doesn't matter. Cheers
  3. djcalle

    Australian Roll Call / Registry / Deals Thread

    Anybody with a Blast or Net city tube on it's way out (MS2930, MS2931, MS2933 or MS2934)? I'm looking for a yoke. Happy to either buy or swap a good condition yoke for a working tube I have chucked a blast yoke on, I just don't want to remove the yoke from that tube as it would be a waste.
  4. djcalle

    Australian Roll Call / Registry / Deals Thread

    its seems that they are planning for the latter. DS and co are not known for dealing in poor form don't think they'll start now.
  5. djcalle

    Australian Roll Call / Registry / Deals Thread

    I had a check at the thread and a few ppl recently said it is a interest check rather than a waitlist, also the list has been updated in a long time. I did express my interest though.
  6. djcalle

    Australian Roll Call / Registry / Deals Thread

    Good news @djsheep . I'm down for a CPS1 multi.
  7. djcalle

    Australian Roll Call / Registry / Deals Thread

    Hey guys, I'm selling my Groovymame PC, located in Melbourne SE suburbs: -i5-750 - 4GB RAM - HD5770 1GB - 500GB HDD -Mounted on piece of wood fitting in a blast city. Would probably fit in other candies too -It's currently setup for a Nanao MS2931(3sync) so windows boots in 31K and games boot...
  8. djcalle

    Australian Roll Call / Registry / Deals Thread

    you're one week too late, just sold one with gdemu and a couple other mods done
  9. djcalle

    Australian Roll Call / Registry / Deals Thread

    Exactly, this one has been there for a while and potential buyers can also easily inspect it, being an actual store. People do get stupid during auctions though so you never know. I recently got a NNC for half that price, although monitor was swapped with a MS2932 with burn in, so not as good...
  10. djcalle

    Alright School Me Please - Nanao MS2930/31/33 Tube Swap

    I made these guides and threw them in my 2 cars so whenever I see a potential donor on the side of the road I can instantly gauge the tube curvature compatibility. The MS9/wood ones were made from a astro bezel and the plastic ones for the blast were made from a Philips matchline TV with...
  11. djcalle

    Australian Roll Call / Registry / Deals Thread

    Patience, look every day on all usual websites and groups, then move fast when you find one. People that seem to get luck actually look every day for months/years, it is not really luck.
  12. djcalle

    Picogun video buffer

    Awesome. perfect for using RGB modded consumer TVs in cabinets where you don't need anything else than the video circuit! Thanks for sharing, I am going to print some and have a go. One thing that could be useful is some mounting holes. how are you planning on mounting yours?
  13. djcalle

    Minigun Supergun - An Open Source Supergun

    Hi all, wondering if anyone has made a standalone board with only the RGB circuitry. Something that would be useful to use SCART tvs in a real cabinet?
  14. djcalle

    Australian Roll Call / Registry / Deals Thread

    Hey guys, I put this 68cm tube up for free on AA, thought I'd share this here too: https://www.aussiearcade.com/forum/trading-forum/for-sale/freebies-corner/2149955-68cm-tube-for-nanao-ms9-please-read Up for grabs is a 68cm panasonic tube made in Japan. bright and sharp, no burn in. I was...
  15. djcalle

    CPS1 Graphical issues

    yes I did, no change.I also checked continuity oon the pins of that chip. Thanks for that I'll check MAME!
  16. djcalle

    CPS1 Graphical issues

    Yes mate, I checked them all against MAME romdumps I believe (did this a long time ago) I will continue checking continuity between chip pins and pins on bottom of board to confirm chip legs and sockets are ok. If this tests all god I might test the mask roms again. I am pretty sure there are...
  17. djcalle

    CPS1 Graphical issues

    unfortunately not, when I swapped the boards around with my mate's working one, swapping the C board would not even boot, in any of the swap combinations, I assume it was a different revision and tied to the B board. Are there any tests that can be done for the C board custom?
  18. djcalle

    CPS1 Graphical issues

    Thanks @xodaraP! I was fortunate enough to find someone kind enough to provide me with a replacement PAL16L8 which they programmed and we did a swap at theirs, no change unfortunately. It could be that the PAL was not properly programmed somehow or that the traces or socket of the !a chip on...
  19. djcalle

    CPS1 Graphical issues

    Hi All, I have SF2 WW CPS1 board with major graphical issues. What I have done so far: Swapped with working boards: my B+C boards with a known working A board has the same red scrambled graphics. (see pics) my A board with a known working B+C boards works with a weird vertical black line on...
Top