Search results

  1. mR_CaESaR

    Namco Noir advice

    I ripped mine out since I couldn't find replacements. I put a 100v LED on it and just tapped into the existing 100v connector. As for the monitor, any 32" LCD will fit, it's just a matter of getting creative with how you mount it. 32" LCD upgrades is on my "to do" list for the Noirs.
  2. mR_CaESaR

    4.02 CF DIMM just stopped working Error 22

    It's when the voltage hits over 5v. The tolerance on the buffer chips aren't that great.
  3. mR_CaESaR

    4.02 CF DIMM just stopped working Error 22

    Are you 100% you've soldered correctly and there's no bridges? Have you also done the bios?
  4. mR_CaESaR

    replacing scsi cd-rom drive with scsi sd card adapter?

    Yeah I now use a Zuluscsi for my cps3 setup. Works great and there's zero fuss with loading the iso
  5. mR_CaESaR

    GunBarl guns don't recoil and can't target anything on the far left

    There is a 24v psu inside the cab. The gun should be connected to a 6 way connector consisting of 5v, gnd, trigger, optical 24v and 0v, you can trace the wire connected or grab a multi meter out and test for voltage
  6. mR_CaESaR

    GunBarl guns don't recoil and can't target anything on the far left

    Open up the gun. Going off my previous guns, I found some operators unplug the solenoid as it gets annoying for the venue. If it's plugged in, then you'll need to check your 24v rail and ensure that's working. If that's working, there might be a setting in the options to disable the solenoid.
  7. mR_CaESaR

    MP07-IONA-US JVS/USB I/O Board: Worldwide Sales & Troubleshooting Thread

    I definitely wouldn't recommend it in a tournament setting unless you have a predefined setup that is all pre configured and users have to use the sticks plugged in. I've tried replicating a tournament setting at home and I personally found it to be a dog's breakfast, in my opinion, it's 100%...
  8. mR_CaESaR

    4.02 CF DIMM just stopped working Error 22

    I believe it's very common for these to go if the psu runs over 5v, it doesn't take much to kill these from what I've read. I bought my buffers off ebay
  9. mR_CaESaR

    DARKSOFT CPS2 Champion Multi: Instructions and tips (new Version after 10.2020)

    No idea, I've never not had key writing wired up.. Someone else will have to chime in on that topic.
  10. mR_CaESaR

    DARKSOFT CPS2 Champion Multi: Instructions and tips (new Version after 10.2020)

    That's definitely not right. I've used the pack labelled Darksoft CPS2 2020-05-24.7z and you switch through games easily
  11. mR_CaESaR

    DARKSOFT CPS2 Champion Multi: Instructions and tips (new Version after 10.2020)

    Make sure you partition to fat32 as a primary drive and not a logical drive, by default it's configured for logical. If you use logical, the multi won't read it. Once it's primary, load the games folder in the root directory as from the rollup pack and you should be right after that.
  12. mR_CaESaR

    Budget Naomi Analog Sticks

    I didn't realise there was an official harness for analog to CN8 to use on the 10 way connector :) Funnily enough, there was a time @Lemony Vengeance and I were talking about using CN8 as a pass through for Monkey Ball which I'm still yet to do - I just pass through my cable in that empty...
  13. mR_CaESaR

    Budget Naomi Analog Sticks

    That's because that's a 34 way header and not a 26 way header. The loom goes to CN5 on the blast city IO - that blast city IO has nothing to do with JVS analog, it's simply a way to pass through data, it's responsible for the following: What I believe you need to do (if it's anything like...
  14. mR_CaESaR

    FS: CPS3 Multi setup

    Wish I could get Esp Ra.De off you. GLWS man.
  15. mR_CaESaR

    DARKSOFT New CPSIII Ultra Simms! 8 times the size of a regular SIMM

    All good on my part.. CPS3's just haven't been really nice to me recently haha i'm cursed. Well at least we know CPS2 multi is done and dusted.. now I just need to read the doco for CPS1 install and next visit I can get to that one haha
  16. mR_CaESaR

    DARKSOFT New CPSIII Ultra Simms! 8 times the size of a regular SIMM

    Nah I'm not comfortable with mucking around with it at smd level as it is not mine. I'll send it to @djsheep on behalf of @DRAGONKZ so he can "test" and confirm and then the discussions can be had with how to move forward - I'm just the dude trying to help a mate out by writing the data on the...
  17. mR_CaESaR

    DARKSOFT New CPSIII Ultra Simms! 8 times the size of a regular SIMM

    That's the only thing I can think of, but I just wanted to completely rule everything out just incase it's user error :)
  18. mR_CaESaR

    DARKSOFT New CPSIII Ultra Simms! 8 times the size of a regular SIMM

    I'm not sure of any other version of the software, I've just used the one in the documentation. I'm more than happy to try it, the logical part of my brain is saying it doesn't make sense as I've been successful in writing 7 simms (when you count the U9 and U10 simms). However, I'm more than...
  19. mR_CaESaR

    DARKSOFT New CPSIII Ultra Simms! 8 times the size of a regular SIMM

    I'll wait for any other recommendations from darksoft and shootthecore and then I'll send it out, the post office trip can also be used to send jotego my faulty cps3 :)
Top