Search results

  1. R

    CPS1 Multi. Official Thread

    And is anybody able to program them?
  2. R

    CPS1 Multi. Official Thread

    Hi guys. I recenlty bought a brand new Lucent DSP16 chips to use them as a replacemet for original QSound chips. I only want to say that these ones do not work. I got only silence on CPS Multi. According to Darksoft these chips could be programmed only once and were factory programmed probably...
  3. R

    Irem M92 Multi Game Support

    All ROM boards use PLLC 08J27291A1/8J27291A4/8J27291A7/8J27291A8 etc.. parts. These are sound CPUs. Do they differ each other? Are these some official parts or a geniue ones? Earlier ROM boards uses GA23 parts while never ones use 08J27504A1 and PD65082. What do these chips do?
  4. R

    Irem M92 Multi Game Support

    And how will look like the fully reversed ROM board? There are geniue chis on B boards. The sound CPU and the sprites chip if I am not wrong? And what is this 0BJ8 custom chip for?
  5. R

    Irem M92 Multi Game Support

    and here is the 11th B board
  6. R

    Irem M92 Multi Game Support

    @Mitsurugi-w What does this 0BJ8 custom chip do? All A boards of all games the same with M92-A-B lettering. It seems that Blade Master has the same board as Gunforce 1. It means no MULTI and only fully reversed ROM board? I am attaching pictures of the B boards I have found. Only Dream Soccer...
  7. R

    CPS1 Multi. Official Thread

    Thanks!
  8. R

    CPS1 Multi. Official Thread

    And anybody knows where to get a JAMMA 56-pin connectors but ANGLED? Thanks
  9. R

    CPS1 Multi. Official Thread

    So the signals are routed only to 30-pin edge connector on filter boardbut no further, not to MULTI. I have another question. Some SuperGuns have connected 2P buttons 4 and 5 to c & d and 1P buttons to 25 & 26 pin of JAMMA edge. These additional buttons could be "turned off" on Frank_fjs...
  10. R

    CPS1 Multi. Official Thread

    Hi, I have PS 1.5 Multi at home and I am awaiting a SuperGun which should arrive next week and I have a few questions On the left side there is Street Fighter 2 and on the right side Captain Commando. I will use the 92641C-1 board so I only use a switch to ON position on the CPS MULTI. So if I...
  11. R

    APOCALYPSE Sega System 16B Multi Sales, Installation and Support

    OK. And how do you want to pay? Send a a PM pls. thx
  12. R

    APOCALYPSE Sega System 16B Multi Sales, Installation and Support

    Hi, please put me on the list for v1.5 too. One piece please. When are you going to finish the V2 (SD card version)? And is the 1.5 version available yet? Thank you.
  13. R

    APOCALYPSE Sega System 18 Official Interest Check and Wait List

    Hi, please put me on the list too. One piece please. Thank you.
  14. R

    APOCALYPSE Sega System 18 Official Interest Check and Wait List

    Unfortunatelly I have no hi-res pictures. It is all what I have found on the Internet... The additional CN9 header should have something common with other controller or spinner?
  15. R

    APOCALYPSE Sega System 18 Official Interest Check and Wait List

    Hi, could you tell me someone what difference is between these two Sega System 18 boards? One board is labelled 171-5873-02A (837-7177-02) and second revision is 171-5873B (837-7177). The 171-5873-02A has CN8 and and additional header CN9 while 171-5873B has only CN8 header. What is the CN9...
  16. R

    Official: CPS1 (CPS1.5) Multi by Darksoft/Apocalypse - Interest Check Thread

    I would like to use Marq's CPS2_DIGIAV board with CPS1 and CPS1(1.5) Multi. I have a question about of sound output of the Qsound (both CAPCOM Q1 or its FPGA version). Can I "catch" the digital signal from CAPCOM Q1 chip or its FPGA version in I2S or RJ form and where? Or the digital outputing...
  17. R

    Official: CPS1 (CPS1.5) Multi by Darksoft/Apocalypse - Interest Check Thread

    Hi, could you put me please on the CPS1 Multi Kit list please? I glad to buy one piece. Thanks
Top