Search results

  1. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    No worries! Glad to hear you're all set up :)
  2. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    OK, here is my breakdown of your current situation: WiPi uses 2 network configurations, wired for the Naomi side and wireless for connections to the website running on the Pi. By default the ranges are: Wired: 10.0.0.1 Wireless: 192.168.42.1 This is how it is configured out of the box and...
  3. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    So your home network is using a 10.x.x.x IP address range? You'll have issues if connecting the pi via your wifi if so. If that's the case you need to change the wired ip address, use 192.168.0.1 with subnet mask 255.255.255.0 and use 192.168.0.2 for your netdimm, match the address on the...
  4. chunksin

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    I didn't get past the compilation stage and can't remember complaining about it, sorry if that was your perception, I was trying to help but the version of Raspbian I was on was a year old and for some reason it wouldn't compile properly. Pretty sure you fixed it but knee deep in my own projects...
  5. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Bit of useful info, if you have an old piforcetools setup on a non wifi enabled Pi like a B+ you can add a USB wifi adaptor using the Mediatek RT5370 chipset and WiPi will work fine. Good option if you can't get hold of a Pi 3 or 4 for a reasonable price.
  6. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    I've seen it on F-Zero AX, that can need a reboot before it starts properly, could be down to caps or something maybe? Not played a lot of WMMT so hard to say on that one
  7. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    It's a great idea and go for it, I've got no issues with people adapting the image for whatever they like. X11 and openbox are installed and available, set up for the 3.5 inch touchscreen, the config files are in /etc/X11/xorg.conf.d and /etc/xdg/openbox
  8. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Sorry about that issue with the CSV data, I'll resolve it properly in the next release
  9. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    I've come across this with another user, there is a missing record in the netdimm csv file, you can manually correct it by connecting to the pi and browsing to /var/www/html/csv/dimms.csv - make sure there is a column called cab at the end - you can add this by just typing ,cab after the last...
  10. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Have you run the Enable OpenJVS Hat script from the menu?
  11. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Very cool! so that communicates between the controllers plugged into the Pi and the Tuscon Logic board? OpenJVS works in a similar way, is there any reconfiguration that needs to be done with that board that you could add to a webpage?
  12. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Nice idea - will add that to the next release
  13. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    I was thinking about updating this to use a higher resolution oled screen with buttons and a mini joystick to update the old LCD but I can only find small bonnet sized boards rather than full size hat boards. There is a way to rotate the LCD, the instructions are in this thread, back a few...
  14. chunksin

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    New card reader arrived, the ACS ACR1281U-C1 which is a dual interface reader, handles smart cards and NFC via the reader pad or the slot. By default the NFC radio shuts off when the NFC card is inserted which is annoying but I've figured out the control codes to send to stop that happening...
  15. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Using the hat serial you need to loop CTS and RTS at the Naomi connector and switch TX and RX pinouts. The hat only has TX, RX and ground hence the need for the loop. Info is added to the latest manual update
  16. chunksin

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    Perfect, thanks - the game is doing something very odd, ejects and closes the shutter as the game starts up almost like it's disabling the reader, works fine in ID8.
  17. chunksin

    NAOMI 2/Chihiro/Triforce Card Reader Emulator (Initial D3/WMMT/Mario Kart/F-ZERO AX)

    Hit some issues with ID6 and I need to build a serial tap to see what's going between the Ringedge and the reader - could this be done with a pair of USB-Serial adaptors and tap into the TX from both sides to the RX pins on the adaptors?
  18. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Yep! Added to feature request list Is this so you don't have to scroll through the list to play the same game again? out of interest, how may people still use the LCD screens? It's dead easy to add more features to display information on the screen, does anyone have more requests?
  19. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    https://wiki.arcadeotaku.com/w/Sega_NAOMI_Error_Codes Error 01 Display: THIS GAME IS NOT ACCEPTABLE BY MAIN BOARD. Cause: The ROM BOARD (or DIMM BOARD) is not connected correctly to the MAIN BD. The NAOMI 2 ROM board is mounted on the NAOMI main board. Countermeasures: First, turn power off...
  20. chunksin

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Check your updates everyone, new release is out, in brief: SRAM save and restore in OSM (use the test switch on the Naomi to access the menu) ID card emulator refresh - now includes JP support Naomi netdimm hori/vert setting for OSM auto filter New settings definition files for OSM (hold start...
Top