Search results

As I'm saving up for a Naomi 2, I want to adapt my custom wheel's DB15 pinout to the S-JIHP's pinout (standard DB15 gameport connection) so I can easily adapt my modded wheel to JVS systems. Is there a high quality female to male DB15 adapter I can purchase online that will let me jump the pins...

That's so sick! An upgrade done correctly. I hope any operators restoring these cabinets from the dead read this thread and take note, because squished 16:9 ratio is a no-no!! I love my Harley-Davidson stack, which was from a cabinet I played on as a kid that got damaged. I usually turn to that...

To add a little flair to my racing game enjoyment, I decided to upgrade my Scud Race ROM board to Plus. A very worthy upgrade with the Super Beginner course and cool FMV intro, and for someone new to eprom programming, it's a great start. You will need to change ICs 13, 14, 15, 16 and 24 with...

Very helpful information. Looking at the driver, it seems the only games that use 64MB chips are Ocean Hunter, the BOTE version of Daytona 2, and both Spikeout games. 27C160 and 27C322 are likely all I need, judging from ROM sizes. Seems like Daytona 2 PE (with nem's decrypted ROMs), SR2...

One of my best friends in Australia bought me a Model 3 Step 2 ROM Board as a Christmas gift, which was originally Virtua Striker 2 Ver. '99. I plan to set this up as possibly Sega Rally 2, Emergency Call Ambulance, or Dirt Devils (if I can find a security chip for the latter two games). Do any...

I had a Harley-Davidson M3 Step 2 that had this problem; it was a Virtua Striker 2 conversion from China. Maaaaaaaaaaaaaan I wish I had done the same thing instead of destroying the CPU board with the wrong equipment in attempts to repair it. You learn from your collecting habits. Fortunately I...

Edit: Found another ROM Board for use in my faulty Virtua Fighter 2 stack that has a bad ROM Board. Perfect! Hello A-P Community, I am on the lookout for a full Virtua Cop 2 Model 2A-CRX stack or ROM Board, and if you have full stack the cage is optional but I'd greatly prefer to have it...

I own a Virtua Fighter 3 myself that I bought untested about 3 and a half months ago; however it just boots with a "pop" screen of random colors and then back to a black screen. I had replaced the CPU Board once with a "working" one and it gave the same error as when I first bought the stack...

So I have another racing wheel that I successfully modified to use on my Model 3 driving boards -- Thrustmaster NASCAR Charger 2. The paddle shifters actually have pots in them, and I've adjusted both those paddles to accomodate what Scud Race and Daytona 2 want for pedals (around 30-D0H), given...

As I was rewiring my Happ 45 light gun to a DB15 cable to appropriately accomodate the home environment, I noticed the dot in the Gun Mark Check screen of House of the Dead wasn't moving properly even though the gun calibrated fine. I panicked and gave up a first, but as I was shooting the...

Yeah the memory test shows the last scene that was loaded before the operator entered the test menu. Sadly I was canceled on the Iiyama monitor due to high UK shipping costs. Additionally I saw there was a particular Viewsonic monitor from 1996 that supported 24khz -- the PT770. It had a...

I did a further test of my HotD ROM Board and it passes all the ROM tests which surprised me considering the whole board was gross when I got it. Sound works fantastic also, as this game in its current emulation suffers from poor SCSP emulation of the Model 2A/B/C (Side story: I ported MAME's...

Yeah, I wasn't sure if I needed those two. The listing I found that had the modified filterboard didn't have those two jumpers up there.

So I spent some time today soldering a 6-pin male 2.54mm connector to my Model 2B filter board, as well as the jumpers underneath (I used 0ohm resistors and small bits of wire), and after doing quite some cleaning to the ROM Board and popping it in the other Model 2C I have, my House of the Dead...

So all I'd theoretically need is a 6-pin 2.54mm header to solder there and a 0hm resistors on the front of the filter board, correct? Thanks for that info.

Welp, I have a House of the Dead 1 PCB arriving today. Purchased it as "non-working" but since I already have a working Model 2C I hope I can get something going and can temporarily swap the ROM board out. I've got two gun IO boards but one is not working well. The other one I shall test with...

Mine arrived two days ago, promptly, though there was quite a customs delay with my postal service. It is 100% a plug and play replacement for the original sound board as the connectors are the same, and the hassle of changing out individual sound boards when swapping another DSB-compliant game...

Hi folks, I'd be looking for a Naomi 2 motherboard and JVS I/O with the Wild Riders cartridge or just the cartridge itself and give you a reasonable offer. There are no carts of the game on eBay currently. I have a setup of Harley-Davidson controls that would be ideal to use the game with by...

I only have boards and hacked console wheels (very labor-intensive hobby but super rewarding) to play these, but Super GT/Scud Race uses the DSB1 sound board used in Model 1s and earlier Model 2C stuff like Touring Cars. I just sold both my DSB1 and 2 boards to Japan in favor of Rom1's DSB Clone...

I believe you can make an adapter that goes from a 5-pin JST NH connector (I have no knowledge of the pinout for original Model 2) and then just wire that to a DSUB-15 breakout or connector with R, G, B, Sync and GND. I've got a Nanao FlexScan 8060S (super old, from the late '80s) that works...