Search results

  1. E

    OpenJVS - JVS Emulator

    I've continued with the Guncon3 tests and so far so good, 2 player action is great, but there ara a couple of notes: - For Confidential Mission I had to enable a Reload button (Button B) for Screen-In/Out reloading. - Lupin the Shooting boots, i can coin and start a game but gives random "Com...
  2. E

    house of the dead 3 chihiro cf boot and etc question.

    You can get a Raspberry Pi and a compatible 32 GB SD card there is a guide to install this solution in this thread: https://www.arcade-projects.com/threads/naomi-pi-wipi-netbooter-compatible-with-pi-3-4.14019/
  3. E

    house of the dead 3 chihiro cf boot and etc question.

    Your unit should be almost ready for netboot, you just need to change jumper setting on the netdimm plus set an ip address for it. I would recommend the WiPi Netbooter solution on a Raspberry Pi for netbooting. I have the same setup and can netboot HotD3, Ghost Squad and Virtua Cop 3.
  4. E

    Lightgun multi-game board a la Pandora Box?

    At least you can get a naomi netboot setup and play Hotd2, Confidential Mission, Death Crimson Ok, Lupin and Maze of the kings with the jvs setup.
  5. E

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    I upgraded my WiPi and Death Crimson OX is listed in the Digital (Stick) section instead of the Lightgun one. Don’t know if it was that way before, just a heads up as it also set the OpenJVS to generic instead of generic(shooting). Also is there a way to tie a netdimm to a type of controls...
  6. E

    Naomi Lightguns - What you need?

    You are correct I just tried Guncon3 and it worked great with the OpenJVS hat.
  7. E

    OpenJVS - JVS Emulator

    Just tested Guncon3 support (At least for 1 player) and it worked great. Full run of HOTD2 on Naomi and had no problems. I used drivers form: https://github.com/lymandev/guncon3 And the next Device Map which I think can be improved: BTN_WEST CONTROLLER_BUTTON_TEST BTN_EAST...
  8. E

    Naomi Lightguns - What you need?

    HOTD1 guns are not compatible with Naomi Games. From Naomi to the newest generation of gun games they use a Sega Type II IR setup. I think you could also use the OpenJVS solution with Aimtrack or Gun4IR guns but I have not tested that yet. I think the cheapest option to play in original hardware...
  9. E

    Fun with Sega Lindbergh shooters...need help or advice

    As far as i remember, GS Evo sound is sourced from the integrated sound card, i think it’s the green connector labeled as Front.
  10. E

    OpenJVS - JVS Emulator

    Perfect, will see if i can work something out when i get my hat. I know Sinden has raspberry pi drivers and there are some linux gcon3 drivers floating around but i think they are not fully functional.
  11. E

    OpenJVS - JVS Emulator

    Don’t know if this has been asked before bur, is it possible to add Sinden or Guncon3 support to this project?
  12. E

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Ok, note taken. Thank you for clarifying that.
  13. E

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Hey chunksin, thank you for this wonderful solution! Is Server mode/Single boot supported on Chihiro? Are there any requirements? For me it´s working very well on my Naomi cab, i power on the cab and it boots to OSM OK, but when I power on my Chihiron (Type 1) gun cab (HOTD3) it goes to...
  14. E

    MP07-IONA-US JVS/USB I/O Board: Worldwide Sales & Troubleshooting Thread

    Awesome, thanks for the insight. I would like your post if only i knew how to do it.
  15. E

    MP07-IONA-US JVS/USB I/O Board: Worldwide Sales & Troubleshooting Thread

    Is there a wiring diagram for this use case? How would I connect the 3 USB cables (2 guns, 1 sensor)?
Top