Search results

  1. Orakelschaf

    Nanao MS2930-S-E (Blast City) "HV ADJ", "X PRO","B" Potentiometer value

    Thanks a lot for the values - Those help! Is it possible to get the Voltage Value of B (just to make 100% sure it is set correctly on my friends cab) (if it is the same as on a M9 the voltage is measured between GND and T2)
  2. Orakelschaf

    Nanao MS2930-S-E (Blast City) "HV ADJ", "X PRO","B" Potentiometer value

    Would anyone so kind and measure B+ on the MS2930-S-E? :)
  3. Orakelschaf

    Nanao MS2930-S-E (Blast City) "HV ADJ", "X PRO","B" Potentiometer value

    I had to swap the "HV ADJ" "X PRO" "B" Potentiometers and measured set values before: - HV ADJ = 22k (47k Pot.) - X PRO = 10,70k (10k Pot.) - B = 329 (on 1k Pot.) Since i am unsure if those are the really correct values: Can anyone point me in the direction for the correct values? - I am...
  4. Orakelschaf

    [solved] Nanao MS2930-S-E (Blast City) "TRAP" Potentiometer value

    @nem : Do you know where i could find replacement potentiometers which would fit if i would replace all? - 2,2k, 3,3k, 4,7k,680k ones are somehow non-existent :( thanks alot
  5. Orakelschaf

    [solved] Nanao MS2930-S-E (Blast City) "TRAP" Potentiometer value

    To clarify: I only need the value/number of the VR451 potentiometer since mine is missing and needs replacement :(
  6. Orakelschaf

    [solved] Nanao MS2930-S-E (Blast City) "TRAP" Potentiometer value

    Hello, i am looking for the value of the "TRAP" potentiometer (VR451) on a Nanao MS2930-S-E PCB (PCB Ref: 05A00732G2). thanks alot.
  7. Orakelschaf

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    No. I just want to see some information on the Display. Like "Booting", "Uploading", "Playing xy" etc. I couldn't care less for the buttons on the screen (since i select games by web browser). The display is nice to see something is happening. Currently i am testing a 3,5" touch display. Is...
  8. Orakelschaf

    OpenJVS - JVS Emulator

    Thanks a lot for the diode suggestion. Will order some and test it. I am using the "DSD TECH USB to RS485 RS422 Converter Adapter with FTDI FT232 Chip"
  9. Orakelschaf

    OpenJVS - JVS Emulator

    - Triforce -> normal USB cable -> Sega I/O = Boots - Triforce -> Cut red Wire USB cable -> Sega I/O = Boots (Strange, i expected it not to boot - Triforce -> Cut red Wire in OpenJVS adapter -> Pi = Boots It looks like that the sense line of the adapter is doing something unexpected. Will redo...
  10. Orakelschaf

    OpenJVS - JVS Emulator

    - Triforce 1 - Sega JVS IO = Triforce boots - If i cut the sense line what should happen? Should it boot or not?
  11. Orakelschaf

    OpenJVS - JVS Emulator

    I built an adapter with a sense line (as shown above), used a dongle with a FTDI FT232 chip. Noami 1 and Naomi2 = no problems. Triforce1 does not boot if the JVS cable (from the built openjvs dongle) is connected). Why? Is there anything i can test/measure?
  12. Orakelschaf

    An improved JVS-PAC (JVS-PAC 2)

    Thanks a ot for this project - Just ordered a JVS-Pac2 :) Is there anywhere a case (maybe as 3d printed version?) available.
  13. Orakelschaf

    OpenJVS - JVS Emulator

    Red Wire to Pin 32on Pi (GPIO12) Pin32 to GND via 1k Ohm resistor
  14. Orakelschaf

    OpenJVS - JVS Emulator

    I need help with troubleshooting the openjvs to triforce type 1 connection - I use openjvs (current version) in a wipi setup. - this runs nice in my noami setup (= it is working) - I used a DSD Tech FT 232 USB adapter - If i plug the "USB" cable into a Triforce Type1 and boot it the screen...
  15. Orakelschaf

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Is there a way to get "currently playing GAME" and/or "Last GAME Played" (just the game name) to be displayed in the 16x2 LCD Display?
  16. Orakelschaf

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Thanks for the awesome WiPi Software! - Started using it a couple of days ago and it is amazing! Update: I just attached the Adafruit RGB Negative LCD Display (just as before) and figured out that i have to set a color in options menu to get any display output *facepalm If i attach a 16x2...
  17. Orakelschaf

    Minigun Supergun - An Open Source Supergun

    Thanks alot!
  18. Orakelschaf

    Minigun Supergun - An Open Source Supergun

    Hello everybody, i am about to build the 1.7 version of the mingun (since somebody gave standard/advanced pcbs to me :D) - I got a minor question: What are the switches (SW3, LPF, SW4) for? Thanks alot!
Top