Search results

I went back and messed with it some more. Sometimes it’s showing the same voltage as my multimeter and sometimes it doesn’t. There are times I would up the voltage and it still will display 5.033v. Also if I wanted to calibrate the voltmeter do I just turn the screw? Thanks again!

Thanks, did you mean would or wouldn’t worry. Also I did send him a message just in case.

Update: I just received a kick harness, CPS2 kick harness adapter, and Atlas from @XianXi and they look great! I do have a question though. I was running a street fighter hyper fighting board with the Atlas and I wanted to double check the voltage with my multi meter to make sure the Atlas was...

I have the exact same issue with my one Japanese A board. It acted the same way when I used it in a cab and with a Sigma Supergun. Sometimes it works and sometimes it doesn’t.

When you say they can make one do you mean the JNX adapter or the two kick harness?

Can I order directly from the Jamma Nation X website?

Just want to double check before I purchase anything, I want the JNX v1.3 Atlas - The Works CPS1/CPS2 right? Also, where can I get a CPS1 and CPS2 kick harness? Thanks!

Update: First, I tested with my half working street fighter hf. When the Raijin was on without a board the 5v was showing 5.040v. When I plugged in the street fighter hf the voltage dropped to about 4.971v. I adjusted the voltage so It was reading 5.1v without a board and 5.0v with a board. It...

@Neodogg do you know where I can get a JNX adapter with the bolt meter? I’ve looked for one but I just want to make sure I’m purchasing the correct adapter. Thanks!

Should the unit and board be on? This might be a stupid question but I just want to make sure.

Am I able to adjust the voltage while a board is attached and on? I’m pretty sure I’m not but I could be wrong. I have been adjusting the voltage when a board is not connected and only reading voltage from the finger board, not the pcb side of the Jamma edge. Have you read the other posts in...

Thank you, I will try this tomorrow and give an update.

I may try some of those soon. I’ll do some basic stuff like seeing if my AV cord is plugged in all the way. But would it hurt to turn the voltage up to 5.1v just to see if it makes a difference after I’ve tried some stuff? Some say that they can handle from 5.0v to 5.2v.

I’m not sure how to dial down the contrast. Maybe one day I’ll pick up a HAS but I just bought this and I would like to use it. They are pretty cool superguns. I find it strange though that the lines don’t appear on the CPS1 boards, they play fine but just on the CPS2 boards those lines appear.

Thank you. I just packed up everything for now, I will check it tomorrow. I tested 3 board sets: a cyberbots JP and a Rockman 2 on the same Japanese A board and they both showed the same thing. Then I tested my MegaMan 2 on a US A board and it showed the same thing too. I also pushed down on...

Update: I plugged in my CPS2 boards and they work great. One thing I noticed though is whenever there is a lot of action on the screen, transparent lines show horizontally on the screen. Is this because the voltage needs increased slightly for the CPS2? This did not happen with the CPS1 boards...

Update: I kept the voltage at 5.040 volts and plugged my street fighter in. When I turned it on the screen was black for a second and then it started working! As you can see this street fighter has a pretty bad error but I’ve had it plugged in for about five minutes and it seems to be working...

Also I should mention that the 12 V went down to around 10 V when I made the adjustment. should I still keep it at 5.052 V? Or should I just adjust it back to 5.3

I just adjusted mine. It’s saying its 5.052v now. Do you think I’m safe to hook one of my boards up to it now? Or is there anything else I should check for extra caution? I have a half working street fighter hf board I’m going to test first to make sure but I want to take as much caution as I...

Yep, I just found that a second ago. Thanks! I’m going to try and translate the manual too. Should I try and lower the voltage a little or is 5.3 ok.