Search results

Wow! GLWTS

I am looking to remap Track and Field on the mistercade - and I haven't done this before. I think its setup like this: L (button 2) R (button 5) Select (button 4) I want to map those to Button 1 (L) Button 2 (Sel) Button 3 (R) Fumbled around a little in the menu - I didn't get the intended...

3 for me - same, all had to be replaced.

Excellent! How wide are they Jasen? I assume the CPS1 case is the largest (longest) set of holes. Matt

Hi @Kaysway007 - i should have 1 or 2 of these - let me check my storage tomorrow and get back to you. Where in CA are you? Matt

He doesn't have any at the moment, but I am on his list when he restores a couple of more!

Well - that is a great question - I did an "update_all" last week - but maybe MiSTer didn't get updated - let me check my version. EDIT: User error - I had the lines under the [MENU] section - I moved them up in the config, all works now - this is fantastic! Thanks, Matt

Hi @Natt I tried adding these two lines, and it didn't seem to do anything. If, when booting up Joust (in my case) - I hit a P2 button or joystick after the core boots - that set is designated as player 2 per the note from the mistercade manual. "NOTE: The MiSTer platform resets the controller...

Strange issue I have noticed with Mistercade and Joust - if I hit player 1 start, before entering a coin - P1 is P1, and P2 is P2. If I just enter a coin first, P2 controls are mapped to P1, and vice versa. Anyway to hardcode P1 to always be P1? EDIT - it appears that Mister takes the FIRST...

I saw that one on ebay...

Title says it all! Matt

Yeah - the test menu isn't there. Or at least, the test button doesn't bring up any test menu.

Hi Folks - just want to make sure I am not crazy. I just updated my mister with the update_all script - and I went to set up Joust. I can't seem to find a way to set it up for Free Play. I know the original board supported this, so just want to check with folks to make sure I am just not...

I would grab the latest firmware and give that a go - r1169

I can try swapping the cards - but the LOADING is about the same time - 18 seconds for each. It's the erasing part that is much quicker on the one compared to the other - what is your firmware erase time? I can't imagine that's hitting the SD card at all. Matt

Yes - no all games I have tried work well - but as I said, on the one multi - the erase time is significantly longer (~36 seconds) vs 8 seconds on the other. But - it DOES work on all games I have tried. Matt

This adapter worked fine with it (and a saturn controller). The NeoGeo pad didn't - so perhaps it needs 5v.

Not a stupid question - I did install it... I also tried a HAS db15 to Jamma adapter - and it worked, with my saturn controller. Maybe the neogeo pad isn't supported? Not sure if it needs power. Matt

Hi @Mitsurugi-w - this adapter should work for the 3rd player for Cadillacs and Dinosaurs - right? When I go into the test menu, with my NeoGeo bad plugged in, the directions work, but button 1 and 2 do not light up at all regarldess of the button I press on the controller (A-D). Thanks, Matt

Hello - finally getting my 2nd CPS1 Multi all put away inside my Jasen case (I will just take it all apart when the Dual Oscillator board arrives, if it does). Having some weird differences. The first one, 12mhz dash board, unmodified C board - all good. When I rewrite a game, it takes about...