Search results

Hello, i just got the latest version from AliExpress of the GBS-C with a sync combiner pre-installed & use the Naomi2 with Capcom I/O board now in my Sega Blast City cabinet with Toshiba A46 tube and MS-2930 chassis. I‘m having the same result as you mentioned in the beginning. I don‘t get a...

THANK YOU @Darksoft ... I'm doing the packing now.

thx!

Thx again @Darksoft but I mean what‘s displayed on the monitor after flashing these two test folders (01... & 10...). When it‘s flashed the screen stays in purple & the LCD says „Have fun“.

Hello @MostroVeneno, I‘m looking for a CPS3 motherboard too. If you have another (after Joko3s) one, please give me a note. Thx!

Maybe someone can help me out here too. I copied both reading test file folders (01... & 10...) in the games folder on the SD-card. After both files flashing & verifying the LCD screen everytime says „All done & have fun“. * Is this the OK message? * Should something be displayed on the...

I bought A, B & your boards together as one package.

@Darksoft I checked all connections. Put all boards off & on again. Nothing changed. The seller wrote today that it was tested for 24 hours and built/soldered by www.saveyourgames.it ! Isn‘t that the official distributor for Europe? If it‘s true, does an official distributor do the...

Yes, exactly that one! I put it out and startet the system. The sound issue stays the same. Where can I get the data for burning? And thank all of you (@Darksoft @ekorz @PascalP @VILLAIN ) for your help, even on a Sunday! 🤜🏻🤛🏻

Yes, sound issues are the same with uninstalled chip.

I removed the glue, cleaned the board and checked the soldering. The connections are „fine“. In the end I want to get a connector and wire the cables perfectly to the board but that‘s just for cosmetics. I want to play the untouched roms, so I looked for a champion edition kit.

How can I do this?

Hi PascalP, tried everything you mentioned but bad sound again.

Hello Darksoft, I read & checked this all before I started writing this post. I got the complete kit with a 4gig SD-card. But I only want the full set without any hacks so I loaded Smokemonster‘s base pack. When I flash a game from Smokemonster, the small LCD says ok but the monitor stays in...

...& also I don‘t understand why Smokemonster‘s last base rom pack (t.e.) doesn‘t work. The LCD says the flash is done & ok but the monitor of the cabinet switches from black to purple & stays solid in purple.

Yes, that‘s my problem.

Hello AUB, I‘ve checked the soldering. It‘s not made pretty, but the wiring is correct.

Yes, I‘m unhappy with that hot glue solution too. :(

Hello community! I'm Martin from Austria and I joined new to this forum. I purchased my first (a complete) CPS2 Darksoft Kit with A&B-board, 4gb SD-card with roms pre-installed on Ebay Italy. Now I have sound issues (beeps all over the time). The seller can't help in this case because he...