Search results

It should. The amp is the same that is in the JAMMAizer. Arthrimus demonstrated he amped 31khz using JAMMAizer just fine.

I'll see if I can remove the resistors on the DC2VGA and put on the resistors for the Common attenuated sync levels. If that works, I'll put the post the gerber for the PCB.

Might be how I setup my DC2VGA. I used the resistors for SCART-safe sync levels

Welp, some success. I am powering the amp via USB and plugging it into a laptop. Using a Dreamcast and a DC2VGA adapter, I am able to get it working with RGBHV. So the passive sync combiner works. But switching over to RGBS craps out. The image isn't the kind that just flips vertically. It...

Just missing a resistor before I can solder the rest of the components and then I can give this thing a whirl.

After 4000+ posts on this forum, please conclude I have figured out how to calibrate a JAMMA PSU to +5vdc by now and that I would've calibrated the PSU on my JAMMA cabs to 5vdc. I wish to prevent damage to the device. So I am asking how to keep the 5vdc from the JAMMA PSU stable so the device on...

Thank you, sir.

I want to build a hat for the JAMMAizer that has a header that carries +5v from the JAMMA PSU. I want to ensure the power coming from a JAMMA PSU is stable across the 5v rail to ensure that I am not damaging an RPi or MiSTer that I would be connecting to it. Whether this is done with a regulator...

No. Just +5v. This has to work across many different arcade PSU's, not just a Meanwell.

I want to ensure 5v 4amps of stable power coming from the JAMMA edge connector. What is the best way to do this?

Two separate recent transactions where @tonyt76 was the buyer (JAMMAizer) and the seller (UVC Scaler). Zero issues either way.

WIP Never done this and am admittedly pretty bad at reading a schematic, but here goes (nothing). Let's hope I don't kill myself. The Goal: A test bench monitor. SCART socket soldered to a breakout PCB All grounds jumpered together RGB lines: 75Ω resistors terminated to ground 0.1uf...

Over at KLOV, Omar/Horacio/CandyCabKing/Arcade games is compared is to Billy Mitchell, thereby reaching a wider audience.

STI/Beltman might still deliver for Dion Dakis.

Ohhhhhhhhhhhhhhhhh, duh. Omar/Horacio/Candy Cab King will have company after all when he passes through the gates leading to the lowest depths of human lows. He'll sit bitch between TO and Dion Dakis. They'll form the Unholy Triumvirate. Man, what a scumbag. Totally wasn't worth his man card...

Clue me in on who TO is. I know of Dion Dakis, but not TO.

The community will sniff him out and he'll get banned..........flushed down the toilet again like the P.O.S. that he is.

If he gets banned from that other forum that shall not be named, he'll have reached depths where no human has ever been. What a P.O.S.

Nevermind! Birdland has some locks.

I just need the retaining bolt actually. But if you have a full lock, I'll swoop that up. Hit me up if you have one.