Search results

ah woops. no worries :) good luck with the sale~

is the sunset riders still available?

Finally was able to obtain the namco system 1 stereo ! I am excited man~

This is probably a silly question, but lets say I was wanting a kick harness adapter made for street fighter the movie PCB would you be able to make one? If so, how much?

Right now I have the HAS as the main supergun, then use the jammer extender connect the HAS to my cps2, both the CPS2 and the HAS have their proper kick harnesses attached. Yet, when I play I get buttons 1-5, but 6 when I go to the test menu it shows that it is just pressed when it is not. Do...

I have recenlty got installed a CPS2 header on my jamma extension, however, I am still not getting access to button 6...I thought this would remove having to cut any trace. Can anyone give a recommendation?

refer to this thread. https://www.arcade-projects.com/threads/namco-system-1-roll-up-pack-all-roms-for-the-system-1-kit.17560/

I would like to be added to the list and with plexi glass as well.

I have a feeling I need to really replace my battery in the atomiswave in order for this to be saved onto the cart/system itself.

Thank you RTW and darksoft for being able to support me on this. It was my first time being able to flash these kind of modules and setting up a multi without support from one of my friends I usually have help me out. Feelsgoodman~

Sorry this is a dumb question, but would I be able to do that with the same programmer? I used the Xport flash cat. Edit: I think I found it, and now will be doing the comparisons. Edit part 2: After reseating for the nth time and made sure the modules were flashed correctly. I also made...

when I put the original eeproms, keycus, the board works fine....so would this be an issue that maybe I programmed the modules incorrectly...even though I believe I did them correctly. Should I reprogram them? If it is the module situation...how would I go about erasing and re-writing the...

I made sure that the modules were programmed properly, but I also did a test by putting the original game back inside. I will try reseating the board.

I followed a tutorial on youtube and removed the ones necessary, minus pal and something else the person mentioned. Also I should mention that the game I used was tank force, and I also made the sure jumper was according.

I just finished installing the Multi, however, when I power it on...I am only getting a black screen...am I doing something wrong? I thought it had something to do with the SEEQ chip, and I placed the Excel chip, however, nothing and still having a black screen.

just to follow up that both of these superguns have -5 volts wired....What else do you think it could?

I kind of figured that it might be something to do with that. I have 2 superguns. One my buddy made and the HAS...and so far the sound for -5 volts isn't coming on either....I don't know if I am just to adjust the power supply to make it -5volts or what...don't want to mess up boards ya know.

As the topic states. I just finally received this PCB today, from a seller on ebay. I have popped it in my supergun, however, no sound comes in. I was looking at the manual that has been scanned on the internet to see if it was a dipswitch setting or what have, but to no avail. I was then...

I think it will be an issue in regards to load times, but from what I saw you can actually make your own(or possibly ask one of the forum members to support ya). here is the thread for reference...

that was a quick turn around. I appreciate it, but as you know if you needed the extra time, I would have been more than ok to wait :) thank you again though~