Search results

Cheers guys. Getting close now! Apologies for the delay, I just want to try and get everything as good as it can be at this stage. I'm just refining a couple of things and I'm going to commit to the first small production run this week. I'll wait until I have the parts in hand before I stick a...

@chrischunli @remnant42 - thanks for the interest :) This has ended up being a bit of a development thread so I thought I would keep this information here... I initially designed the kits to fit my Vewlix Dia Blues but as it looks like others may want the kits I've been able to check and...

Ah, looking back maybe it is the metal 'marquee holder holder' @rautz is after. Apologies if it is...

I just dug the template out and was about to model it up but found I had already done it ^^ I think I did it for @ckong when he was making them. You can download the file [here]. It looks like I used two 2mm thick sheets for these. No need for Kofi or anything, I'm happy to help out where I...

I've not made these for 8+ years but I have got the template still (whoarder syndrome much? :D ). I'm more than happy to create a .dxf for you to get one laser cut somewhere locally. Let me know if that's of use and I'll dig it out and model it up.

Thanks all! ^^ I'll send you all a message once I've got a post up. @Kiljon91 - brackets on their own will be no problem.

By request I've modelled up my version of the Irem Madonna marquee holder. The one at the top is the original, the other photos are of my repro. The original Is a single piece of thick acrylic with a bent steel back piece that bolts to the top cab and keeps the whole marquee holder in...

I certainly hope to have these available if people want them. This version fits my Dia Blue and @wonderbanana 's F. I'm going to remove one of my kits and send it to a friend who has a C and an L AMI for him to check fitment and see if any further mods are required. All being well I'll then get...

@ConvincingJohn - Apologies for the late reply. I wanted to get back to you with a diagram but some other things got in the way. I am picking this up again now and working on the sub panels. I need to make some more looms up for them so I'll put together a diagram at the same time. @bubble...

I've spent a lot of time on this recently but I'm really happy with how things have turned out. I got a design made and the legendary Craig @ atbfab.com fabricated the parts for me. I've had a few internal revisions and two production visions but this is where I am currently: I've used...

@PlayYing - I'm afraid I don't have any versions for woodies. I'm not sure if any else makes anything? @9999 Damage - Thanks for the feedback! Glad to hear everything's working well on the whole. In regards to the the screws grazing the coin chute, I'm afraid you're suffering from early adopter...

Thanks for the feedback guys! It's my pleasure to serve :thumbsup:

Myself and @system11 came up with [these] a little while back. If you're interested he should still have plenty of stock. If not let me know as I have a lot of the RAL colour matched PLA filament left.

Welcome :thumbup:

@AlxUnderBase - Thanks for the feedback and the video. Great to see another one in action ^^ Thanks all for the other feedback too! @hoagtech - done

I've uploaded my files to Printables.com [here]. Although I didn't need them myself I've also added a 1mm shim along with the 2mm in case anyone needs intermediate vertical adjustment. Whilst I'm here, my previous plan was to make the monitor>cab mount in [this post] to get my cabs up and...

Added - Vewlix marquee holder Vewlix_Marquee_Holder_Main_5mm: Vewlix_Marquee_Holder_Sheet_0.5mm Vewlix_Marquee_Holder_Support_1mm Vewlix_Marquee_Holder_All

I've modelled this up ready to make some .dxfs from and thought I would share a .stp in case anyone finds it useful. I've attached it to this post. I'll posts the links to the .dxfs in my [thread with marquee holders/control panels in] once exported.

Great stuff bud, glad to hear it went smoothly ^^

@Sp33dFr34k - glad you got yours ok in the end buddy! @djsheep - Great to hear yours made their way over to you too. Thanks for the feedback both of you. I always try and make things the best I can so I'm happy you're happy ^^ Yeah you do need to be careful removing some of the screws as...