Search results

I doubt it was done in the factory but i am guessing it has been region swapped as the eprom that has been tampered with is the one that usually contains the region byte

That glass sound a lot like the glass on the pin2k pinballs and you get a similar effect if you put the glass in the wrong way up have you tried flipping the glass over?

Never seen a DX Outrunners did they ever exist ? I have seen and worked on a few twin Outrunners and they don't have force feedback as such what they do is shake the steering assembly using a DC motor not sure if this is unique to this game or was used on other games. the shaking happens when...

assuming you have a complete machine and have both the game cart and special mpeg board that the original optical drives 20 pin flat cable plugs into your in good shape if not you will need any missing parts not sure if the optical drive from an saturn console will work as i never went down...

The board is soldered in the wrong place it is supposed to be positioned further down ie the row of empty holes goes where the switch pins you have soldered are and the edge of the adapter you have soldered should be soldered to the row of pins below it hope this makes sense

The orignal drive is an industrial cdrom drive uses a caddy to load the disc the problem is that it uses a custom proprietary interface and is complete unobtainium the good news is that the RHEA ODE unit developed for the early saturn home console will work in sports fishing 2 you will need to...

connect the black wire to the common terminal and white wire to the normaly open terminal on the coin micro switch leave the red wire disconnected just insulate it up so it can`t short on any thing

Yes it is true you must have the i/o board connected at least power CN1 and comm CN2 for virtua cop 2 or HOTD to boot without it you ge pretty much what is shown in your picture

The only viper game i know of that uses a dongle is police 911 2 and the other game that uses the internal serial number is code one dispatch and the serial is tied to the rtc so if your rtc dies and you don`t have a backup for your specific main board you are screwed this game can only be...

In in for 2 units totaly worth it just for the gun games the rest of games good too

Truxpin 1x option 2 thanks

Please add me to the list for 1 unit I have a p47 that has just been waiting for this.

I If this works there should be a picture of a system 12 point blank 2 pcb

Finally Had a chance to find the system 12 point blank 2 pcb set and take some photos just need to work out how to post them in the mean time the main large bottom pcb silk screen text is ( SYSTEM 12 MOTHER (B) PCB ) the paper label on the bottom ( GNB5 VER.A ) top pcb ( COH-700 Sony part #...

Point Blank 2 definitely exists on both system 11 and 12 as i have both and they play identically

Any chance of being added to the list for 1x DIY kit as i finally found a good donor pcb thanks

No it is a totally different beast for a start it has to handle 2 guns and looks quite different to the time crisis I/O that can only handle 1 gun.

Ninja assault uses The V222 i/o also known as JYU board this is unique to this game no other i/o will work.

From memory i think you will find the crypt killer pcb has both the narrow pitch pin out for the 2.5" drive and the standard 50 pin 0.1" for a 3.5" drive you just need to desolder the holes and fit the larger header pins as they are not populated from factory and i remember having mine working...

power connector is JST VL series