Search results

MKII board was fairly priced and packaged super professionally! A box within a box within a box! He cares a lot and you can see it in his stuff. Would do business with again! I felt like I lucked out on this purchase!

@mR_CaESaR, this is more involved that I thought. I guess I'll need to buy a few things. Based off your post, what's a good heatgun you suggest and where can one buy the 29LV160 Flash? Lastly, is the 4.02 firmware on this site? Thanks in advance

I just got this error when booting VF4FT: ERROR 14 DIMM BD FIRMWARE VERSION DOES NOT FULFILL THE GAME SPEC. REQUIRED VERSION 3.17. This is NOT a Netdimm board but a regular one that came with my CVS2 setup. When running the dimm test, here’s what came up: This firmware version is 1.02. What...

Came across this sort of greenish screen issue and ran the self test: D and 0 had a yellow H Wasn’t able to find anything on the official pixelfx site and couldn’t decipher the n64digital documentation (lazy to search really) but noticed these pins weren’t as aligned. Had to do a drag...

FYI: Came across this error when doing an install confirmation on the Sega Naomi 2. CAUTION 53 CHANGE VIDEO OUTPUT OF THIS GAME TO THE SETTING CORRESPONDING TO HORIZONTAL SCANNING FREQUENCY 31kHz. The output was 640x480i on the DCDIGITAL. The dipswitch one was set off. I thought I cleared a...

https://twitter.com/citrus3000psi/status/1625105208815517696 Use a dedicated cable to relieve pressure from the mini hdmi socket. Apparently causes issues with mini hdmi joints. My video was dropping because of that adapter, but only when lifting it and probably cause the hole I drilled was a...

Watch out son, the innernet finna give you shit for that hdmi adapter tho

The same screws it came with, but used them as posts and put the fan in between. The heatsink and screws keep the fan in place fairly well. EDIT: Just switch the red and black placements and you’re good. Use a small flathead to remove the female pins from the sockets. I placed it the same as...

Noctua NF A4 5V, these are the same fans suggested for the silent mod. There’s a pin change you need to do to match the OEM wiring as well. It’s pulling air away from the heatsink.

View: https://youtu.be/9YYM54tiG2c Hopefully, most of you can try installing it yourself as it’s a great way to practice your soldering and modification skills. It’s a fairly straightforward and simple install. Not hard but very tedious. If you have any questions, let me know here. EDIT...

Easiest install imo

Case would be a plus.

Found this on arcade controls, but nothing cleaner than this. Working on restoring a cab marquee. Any high quality psd, pdf, or indesign file formats appreciated.

Necrobumping this as I’m looking for any available templates to use. Currently have a few blank Naomi carts that need labels.

Found

He did it before it was cool 😎 Thanks for your help again, sir!

well… fuck… I’m buying 6