Search results for query: *

It's a known issue on multislots with the Unibios, I think. Moving the games and/or clearing the backup ram may help.

Not unusual at all. I counted 12 in my collection. It's especially common with transparent shells. The newest games I have with this are Samurai 3 and Kabuki Klash, 1995 games.

I followed the instructions online to mod and disable the charging circuit for my MV1C, MV1FS and MV4F, and they're all working great with a CR2032. No need for recharging.

All three of my CR2032's on my MV1C and other two MVS boards have literally lasted for years so far. I'm pretty sure the one in the MV1C was installed in 2016, and I don't think I've ever replaced it yet.

I'm not sure if cutting power will be enough, because you'll still have the RGB signal split and running into the components. Ideally I suppose you'd have all four video signals on a switch.

Sounds like you're all set then. If it were me I'd remove the S-video/composite encoder out of circuit, but if you're happy with it. Please let us know how it turns out.

I was in the same place you are right now. If you feed it power at the jamma edge, I guarantee you the encoder will get powered as well. Maybe that's fine. If you want to do component (I always cut out the middleman and just do RGB) most component encoders output composite and S-video as well...

I ended up getting rid of my composite/S-video CMVS when I switched everything over to RGB. The reason is the encoder inside becomes useless, detrimental to the RGB signal even. Not to mention the holes drilled I no longer needed. That was years ago, so there were more people who still wanted...

I would think you could find an original replacement.

It's quite small. It's difficult to get good photos.

Would it help to take large photos of both sides? Or do you already have those? Have you tried asking the creator of these?

I have this board and still have yet to build mine. Still need to decide and get the right parts, choose a good project case and make the time for it.

Curious what the MVS/AES switch does, since an official controller doesn't have that.

Check this for a potential fix. https://www.neo-geo.com/forums/index.php?threads/fixing-stuck-inputs-on-mv-1c.257588/

Which model of 1-slot board is it? An MV1C or something else? The hardware is different.

What kind of MVS motherboard is it?

I think they must have for the arcade.

I thought the Darksoft Multi doesn't allow loading of custom games until they are added to the firmware. Has that changed?

I'm a member of iq_132's Patreon. Please consider joining if you can't help out in this thread. https://www.patreon.com/iq_132

Vengeance Hunters is good.