Search results

Hey all! Just getting out from underneath my back log! Got a few things back in stock! Reproduction blast city -001 looms - $175 And a new offering: Sega PRAS/APM3 FGC adapters - $45 I have some surprises in store moving forward, mostly things to help streamline my current offerings as well...

I’ve made them. In the past, yes. Still catching up on backlog but they’ll be in my stock of stuff to offer :)

Mega excited for this goodie! It may be beneficial to partner with a retailer in the US and bill ship them over. I promise that there would be a market for this.

The extron box you asked about is a professional solution, so it’s the most trusted. The issue is the sync signal isn’t he greatest on the 360’s vga. I don’t know many other devices that do what you’re needing done though. What price are they at now? As for stereo audio, sounds like you...

@Anubismachete hey man, I am down for three. I’ll slide you one of mine :)

100% this. I’ll spare the exact details, but not only did I take 10 cabinets, I also made hundreds (yes multiple hundreds) of wiring harnesses to make this monumental feat possible! View: https://www.youtube.com/watch?v=TTtWoGlQquA Here’s a video walkthrough with @Cereth I legit haven’t...

These are fantastic!

Returning to report: it was the marquee light. It would send the AC frequency into fits, which would activate the high voltage protection circuit in the monitor. Going to replace the starter and tube.

possibly. People have suggested that I use a stepdown with it.. the previous owner (@FrAshi) has zero issues with it and was using a stepdown, so I'm thinking that's my best bet. I'll be installing it in a few hours, and will return and report.

picked up one of these and after about 30 seconds it causes the monitor and marquee light to flicker and turn on and off... Can anyone who has this get a good pic of the pink and blue power cable it came with?

AHHHHH I think I put the Ground wire on pin 9, not pin 12 like it should have been. hit me up on PM.

I absolutely have a full HL2 survivor setup.. thanks to you :D what is needed?

I"m in for a few more nanners :D when you are all ready

Oh awesome! I can dump my roms, I just need to know what to tell my burner is an equivalent IC so it can be read. The NEC mask rom isn’t listed as compatible :/

Honestly I’m just trying to figure out what to tell my rom burner is in the socket so it’ll read it 😅. They’re 64Mbit NEC mask roms (uPD23c64020cz) however they’re not on my burner’s list of compatible devices. I have a xeltek SuperPro 610P

I'll dump mine and post them here later today.

So, I've had a suicided CPS2 Black version of SFZ3 for the past 10 or so years that has needed repair. have managed to revive it using the avalaunch roms and artemeo's CPS2Black tool, but issues remain and I'm not sure if it's an issue with one of the IC's on the PCB itself, or just a mask rom...

Necro bump here, but @parodius did you happen to dump the 64mb roms for SFZ3? I have one that has GFX issues and I need to something to compare my mask roms against. I'm really hoping you're still here and you have those dumps

No, just simple wiring harnesses.

If you buy this and need one lemme know, I’ll make it for ya :D