Search results

Haha me too, but back in the day @videotronicsuk used to have these very available, so try to contact him and see if there are any left:)

Since Topall ver8.80 or later has obtained a Microsoft digital certificate, there is no need to prohibit digital signatures, just install it directly. No warning is displayed. 1. Uninstall all 360 software. If you do not uninstall, 360 will remove the .dll after installation. 2. Connect the...

I'm pretty certain it loads at least part of the firmware at 'boot'. Mine says "TOP 3000 ver 6.01" at the bottom. I had installed several versions of TopWin in the past, and if you run the 'latest' and then try the older software, it does not want to work with the new drivers. Need to fully...

Start a claim in ebay and you can return the item. He sold a defective product so your protected by Ebay and Paypal etc. Do not let the seller give you the runaround. Good luck!

according to this it can be patched in ram and it will appear. https://mobile.twitter.com/The_Hpman/status/1165174840174829569 But does this also enable the bosses? Edit: this japanese hack it seems.. https://ux.getuploader.com/yumeji/

Can you tell us where it was found?

Afreed, but you have no wierd effects using the pfx chassis with ms9 tube and yoke? Hsize and such are fine? Flat vs curved was no issue?

@Hatsune Mike Saw your tweet about the MS9 tube on Sanwa PFX. I've got two of these PFX's (With original tubes, Hitachi and Shanghai novell) and the image on 15Khz is amazing. Considering to upgrade the MS9 tube to these PFX chassis to get trisync, is the picture on VGA any good with the low...

@Fluffy if your buddy does not care about CGA then we have a retropie image with hdmi where you can add anything you want. Lmk

Maybe bad ram, cpu or even bios? Does it have a speaker header where you can connect one and listen for the system beeps?

The kick connector has two pins for external buttons for vol+ and vol- as well, so it's possible to have external volume controls:) See https://wiki.arcadeotaku.com/w/Kick_Harness#CPS2_-_3.2F4_Player_Harness

I just got myself one of these but it's very different. It's got a H3 quadcore and 1gb ram, they sent me a retropie image along with it. Problem is the cga signal is bad on both my ms9 and pfx and the vga is not detected on the PFX. I spent quite some time hacking these along with "RedboX" on...

Does the controller work 'both ways' and as a black box? If so why not read/dump the KI2 disk with the adapter in between and on PC? Would the result not be a disk image that runs on a KI1 board, without the need for the adapter? :) (And yes, i am assuming at this point, the KI2 hdd dumps we...

From my initial work, the main CPU can read/write to 0x50000 (to 0x50000,FF) and the ARM will do some magic on whatever is written there. You can see the magic in the simulation that is done (for example) in https://github.com/mamedev/mame/blob/master/src/mame/machine/pgmprot_igs027a_type1.cpp...

FYI: I tried this already and it did not hit the BP for any asic communication. Might be something else, maybe nvram related?

We'll need to confirm it doesn't crash first. Otherwise it's a waste of money.

Should be easy to confirm, you can just credit feed all the way to that stage. I don't know if AMBs version has the issue btw.

Thats the version w/ the crash in it. :(

Hey thanks man but this wasnt all my effort. The other guy got it to properly boot w/o crashing and I worked from there. I never reuploaded it to avoid other conversions popping up that have an error. I see they are still being sold and have no idea if they have the crash. Nobody confirmed if...

Best to think outside the box. Flip the monitor to the old style (time pilot etc.) The modern games have screen flip option anyway