Search results

  1. SabreAZ

    *SOLD OUT* Vewlix/Chewlix EZ Multi I/O Panel

    Would love one of these if they ever are made again
  2. SabreAZ

    Minigun Supergun - An Open Source Supergun

    the voltmeter 2 wires get soldered into the tiny + and - through holes.
  3. SabreAZ

    Minigun Supergun - An Open Source Supergun

    arcade monitors do composite? You lost me
  4. SabreAZ

    Minigun Supergun - An Open Source Supergun

    @Frank_fjs oh i agree 100%. Composite is just for absolute convenience, in case a bunch of CRTs need to be sourced and not all of them have optimal inputs Thanks for the info!
  5. SabreAZ

    Minigun Supergun - An Open Source Supergun

    rgb to component is easy. Theres tons of solid products as its just simple transcoding rather thn full on conversion. But trying to get a bunch of superguns for a large scale event and sourcing a ton of crts that can do component is a tough endeavor, hence why i asked about a composite addon
  6. SabreAZ

    Minigun Supergun - An Open Source Supergun

    oh im personally fine! Are there any good transcoders that dont add lag?
  7. SabreAZ

    Minigun Supergun - An Open Source Supergun

    @Frank_fjs I cant remember if this was asked before, any chance of a composite video addon board? I get asked this from people that want me to make them a minigun and i tell them it only outputs rgbs, and they hate the fact that they need another device to work on a regular crt
  8. SabreAZ

    Custom Taito Vewlix Sub Panel

    good enough to say that it atleast works?
  9. SabreAZ

    Sentinel Supergun - Prototype

    should be the same as the minigun/HAS. b4 b4 b5 b5 b6 b6 1p 2p 1p 2p 1p 2p Doh just realized how old this post is
  10. SabreAZ

    Custom Taito Vewlix Sub Panel

    hopefully one gets found soon. I bought this panel specifically to install a volume knob and really dont want to drill and potentially mess the panel up
  11. SabreAZ

    Custom Taito Vewlix Sub Panel

    went out on a limb and tried this Axxess AALC Remote RCA Level... https://www.amazon.com/dp/B003FPD3IS?ref=ppx_pop_mob_ap_share No dice on this one either, threading area is just slightly too short. Boo =/
  12. SabreAZ

    Vewlix/Chewlix EZ Multi I/O Panel

    i may be down for one. Cool idea
  13. SabreAZ

    Custom Taito Vewlix Sub Panel

    so basically, i should probably hold off on buying a volume controller til someone verifies what currently fits?
  14. SabreAZ

    UD-USB Decoders

    have you guys updated the firmware to the latest? Rhetorical question, but I figure I'd ask anyway
  15. SabreAZ

    Minigun Supergun - An Open Source Supergun

    i noticed when usingthe minigun with the ossc, im getting some video signal noise. Some slight wavy noise. Is this normal? If not, what could possibly be causing it? Using a meanwell rt65a, psu, 18 gauge wire, retrogamingcables packapunch scart. And all parts via the BOM, aside from wires...
  16. SabreAZ

    UD-USB Decoders

    woah, awesome news dude! Thats gonna make for a lot of happy people!
  17. SabreAZ

    Home Arcade System

    Well tbh, @jassin000 was right from the beginning. His conversion rate is just way off. He did say "that would add significant 16~32ms (about 12~24 frames) lag." 16.67ms= 1 Frame 16~32ms = approximately 1-2 Frames of lag(not 12~24f) So in actuality, you all are agreeing with eachother =D
  18. SabreAZ

    Custom Taito Vewlix Sub Panel

    definitely would like a red one! With labels is fine. Im curious to see how your final build looks with wiring. Im curious as to how to wire the volume knob? I currently use a cheap(I think Lepy) $20 mini amp from amazon, mounted on the inside wall to the right of the service door/cab power...
  19. SabreAZ

    Custom Auxiliary Control panel for Vewlix Cab.

    oh damn this is nice! TY
  20. SabreAZ

    UD-USB Decoders

    Arlieth, not that i am aware of. What some people do is purchase really short 3 to 6 inch usb extension cables. I know touching or getting near exposed electronics may make people uncomfortable, so using these extension cords allow people to plug and unplug without getting near the pcb. Also...
Top