Search results

anything that can use rj45 eithernet networking and 2 computers/pcb to play vs use 2 computers. anything that can only use 1 computer/pcb to play a game use the namco vs link board

delete all the save folders in the partition that has them using another computer. then put back in ttx2 computer boot back up let it make the folder on its own again. then the saves will work again.

Any word on the progress of this project?

pm sent for: 3 JVS Voltmeter extensions

thinking about it lindberghs and noirs are short to start with. should be fine at 6. if not can always add extensions as needed.

12 ft would be good.

that sounds great would like to run them out of the coin door panel on the noir and the card reader unit on the lindbergh. would it be possible to get both player 1 and player 2 detachable. if haveing tournaments with friends everyone would likely want to use their own controllers.

can i get 3 sets? i am interested. does this work for both player 1 and player 2?

NA-JV2 is what i am using. I likely need to switch to taito fast i/o?

I have this issue too. it is like the game boots up with 1 coin. if you boot up to with settings on 2 coins per credit it shows up as 1/2 credit. its like there is a background file holding this data.

In my case i am running the following: 2 outrun 2 cabs 1 jambo safari, 1 crazy taxi 3 wmmt 3 cabinets inital d 1-3 work fine on the jambo and crazy taxi cabs. honestly the games are better with out the force feedback. outrun 2 works fine on jambo safari and crazy taxi cabs. (have to set...

nice glad to hear it is not like gundam

so is this running standalone with out needing the live monitor?

you still have to have the blue game dongle in the usb slot or it wont work. only the data dongle doesnt have to be put in. the data dongle is the one causing the error your having on your screen.

your memory dongle freeked out. remove it and boot up without it. it did not suicide your memory dongle went bad. also it is odd that dip switch closest to the left is in the down position. all dip switches are supposed to be up. (not sure if that is causing the issue with the memory dongle)

yes it is perfect. 3dx+ had an issue on the screen where you input your name. winteriscoming added a neutral before first gear to stop the curser from going crazy so the steering wheel could be used to dial in the name input. I loved how it worked. honestly, if you do wmmt1-3dx+ use a crazy taxi...

For the coin door just swap the whole door piece. They show up on yahoo auction japan every now and then.

I believe live monitor is suppose to be 5. actual games should be 1-4 and is changeable on the game 357 units. also your router has to have the following ip: 192.168.85.1

anyone know if this live monitor jumper matters. i found this on the manual also found the wireing harness has the same jumper

each game system 357 has to have a player id or game id. has to be 1-4. two 357 units can not have the same game id. each must be unique.