Search results

  1. S

    Mame for Taito Type X2 on Niko's v1.4 multi

    Do you have the CPS2 bios rom?
  2. S

    WTB Demon Front

    It's in the mail Zerox. :)
  3. S

    WTB - Atari Tetris PCB

    I have one I could sell if you still need one. I can test it tomorrow
  4. S

    Mame for Taito Type X2 on Niko's v1.4 multi

    The CJVS came from @corey all I did was map the buttons to Mame default and defined the exit parameter. If you can't find his post I still have the files and didn't try a long button press. I wasn't sure how to code for that to be honest. :)
  5. S

    Mame for Taito Type X2 on Niko's v1.4 multi

    The files and instructions give you 2 options. Games can be itemized in Niko's menu or you can set it up with just Mame on Niko's menu.
  6. S

    Mame for Taito Type X2 on Niko's v1.4 multi

    Plug your hard drive I to the PC and copy files over. The readme explains where to put the directories
  7. S

    TMNT Repair (In Progress)

    I had one similar white screen symptoms and it ended up I needed to replace the CPU. I had no way to test that until it was replaced, so it's a bit of a gamble.
  8. S

    Mame for Taito Type X2 on Niko's v1.4 multi

    The Niko multis hard drive will be readible in your computer. It will see different drive letters and directories for the directories described in the read me.
  9. S

    Mame for Taito Type X2 on Niko's v1.4 multi

    Are you using Niko's Multi on your X2? It's specifically designed to be put in locations based on that. Not USB
  10. S

    Mame for Taito Type X2 on Niko's v1.4 multi

    I would recommend reviewing the readme file again which contains the instructions. It tells you what you need to download and where to put them.
  11. S

    Mame for Taito Type X2 on Niko's v1.4 multi

    I've never tested it or set it up using USB. Everything is designed to be installed on the multi hard drive
  12. S

    Need Help with Finding an LCD Monitor

    A lot of people are scared the first time they discharge a monitor. Once you pop your first anode cap you will realize it's not such a big deal. 95% of the time there is no charge. I just have a big screwdriver with an alligator clip and done it a hundred times now.
  13. S

    "Bad C RAM 1" Message on Pac-Man Screen

    Those pesky edge connectors. Lots of things can cause the game to reboot constantly. Id start at the 4 program roms to make sure they are good
  14. S

    "Bad C RAM 1" Message on Pac-Man Screen

    The VRam addresser, you still shouldn't get a black screen I don't think Those usually have an extra brown socket under the main pins. You can remove the extra socket if those are the pins that you bent. You can take that socket off and either put on another one or just put it directly in.
  15. S

    "Bad C RAM 1" Message on Pac-Man Screen

    You went from an error message to a blank screen? That's very odd. Since you took the board out. Check the edge connector. On pac games it's common for them to get worn out.
  16. S

    Freeplay or Coin play?

    Freeplay all the way for me. I don't feel like requiring coins or anything when guests come over or if I want to get a few quick games in. I use a combination of game settings, Freeplay or Freeplay attract mode hacked roms, HSS Freeplay kits, rig a microswitch behind the coin door rejector, or...
  17. S

    "Bad C RAM 1" Message on Pac-Man Screen

    Just curious if you were able to fix this. :)
  18. S

    "Bad C RAM 1" Message on Pac-Man Screen

    Your video is the normal Pacman boot sequence. When it gets to the end, it was rebooting. The error message and symptoms are consistent with a bad 2114 at 4P. You can swap the Rams around to see if the message changes and to other symptoms to confirm the chip is bad and not a trace or another...
  19. S

    No power to Pac-Man monitor

    I repaired 3 pacman boards about 2 weeks ago to get a board for this restore I am doing. If you hit a wall, post a pic of what you are seeing and I'll see if I can help diagnose.
  20. S

    No power to Pac-Man monitor

    That is one ROUGH fuse block. I just rewired a Pacman cabinet as part of a deconversion. Let me know if you have any questions.
Top