Search results

I dont know what it means either:) Remember reading it in the manual or online...important thing is thats it works

Play with the coast and clamp settings. I had that happening too. Coast st 03 Coast sp 04 Clamp st 03 Clamp sp 04

You could mod one of these

Here some pics of my setup. Pinout of the loom is in the last pic. I drew the connector just lik you see it in the first pic. The numbers are the pin numbers of the connector on the gun board. The hap gun connects to cn2 for player on and cn4 for player two. The red wire shoud go to pin 1.

I'll dig out my system in a few days and let you know. The only thing you need to make is the loom between mobo an gunboard. 4 or 5 wires, very easy

And your motherboard needs the expansion i/o cartridge

You'll need an Atomiswave gunboard and loom between gunboard and mobo. The happ guns plug into the gunboard, just like the original Sammy guns...same pinout.

Well, I'm shotgunning fujitsu's on a Burger Time....have 90% removed now and all still test good.... would be nice to know which is the bad one😆

Count me in for a repaired one.

here's version 8.37 click

Oops, my bad.... it’s my Batronix which can update firmware with the software program😇

I'll check my cd tonight and will upload the software

Did you update the firmware on the programmer, or did you just install the new software

Yes, always worked fine for me, I just tried a few with the 8.83 software. @Apocalypse reports losing the ram test after a software update, If I remember right, his does gal chips. I can’t a good gal chip out of it. Maybe the things are just flaky as hell and the supported chips differ per...

Ahhhhh, that's the way the quotes work....:D

Your doing it the right way. I have no problems with the ram test, so I think its the programmer itself... There seems to be a difference in progammers. Mine wont do anything lower than 27c512. Ive heard others have no problem with the older eproms.

Naah.... I prefer playing Doom with it :D

well, I'll give it a try.... lets see what happens.. Already checked and reprogrammed the Net flash....

Still not getting anywhere with this board. It's just sittng at "initializing,please wait" forever. I noticed this in test mode:Piccy Is this normal or do I have a broken board?