Search results

  1. Dylan

    Capcom Q-Sound amp help?

    So i ended up using a splitter to send the post-amp sound to the subwoofer. Problem solved! :)
  2. Dylan

    Irem M72 multi kit installation & support

    Anyone have the contact info for ordering the rotary selector? Thanks!
  3. Dylan

    Capcom Q-Sound amp help?

    Hi fellow Q Sound fans! Absolutely loving this thread and enjoying Q-Sound from my Capcom Impress with original amp. My problem is I’ve been trying to add a subwoofer while preserving the Q-Sound, but every time I try to split the audio signal to send it to the subwoofer (either with a splitter...
  4. Dylan

    New CPS2 multi running on MSHvsSF B board - LCD issues, texture issues

    Looked at the other side of the LCD connector and...Uh oh. :-( Now I know what caused that burning smell. Must’ve happened when I tried to switch to a longer LCD cable. Damn...totally my fault. Can it be saved? Titles still burn & play fine, just no LCD display...
  5. Dylan

    New CPS2 multi running on MSHvsSF B board - LCD issues, texture issues

    I tried switching with a different LCD and cable...no change :-(
  6. Dylan

    New CPS2 multi running on MSHvsSF B board - LCD issues, texture issues

    Argh...my CPS2 multi was working fine but now no LCD display. Still works fine and all games working great. Tried switching with another known good cable but still no display on the LCD. Tried adjusting the Contrast dual on the board but still no text on the LCD. Help!
  7. Dylan

    Finally, multi System 16B (Sega)

    Please add me to the list If my previous post wasn’t clear enough indication. Thank you!
  8. Dylan

    Irem M72 multi kit installation & support

    That was exactly it! I forgot to check the most obvious thing :) Thank you, rtw!
  9. Dylan

    Irem M72 multi kit installation & support

    Hi friends — I have a perfectly working Air Duel M72 and I’ve just burned the ROMs, installed the multi, double-checked the jumpers, and connected everything. With all 4 DIP switches off, Air Duel (the original donor) runs fine. However, for every other game I’ve tried, they boot as far as the...
  10. Dylan

    Official: CPS1 Multi by Darksoft/Apocalypse - Interest Check Thread

    Interested! In both this and Sega System 16 :-)
  11. Dylan

    Finally, multi System 16B (Sega)

    Interested!
  12. Dylan

    Finally, multi System 16B (Sega)

    Interested! I currently have Golden Axe and Juouki PCBs. Will it work on either one?
  13. Dylan

    The Definitive Guide to Fixing Your CPS2 Multi Kit

    Well I’m stuck. Switched the CLOCK and DATA wires back but still a white screen. My multimeter probes are pretty sharp, but testing connectivity with individual FPGA pins is beyond my skill level. At this point I just want to pay to ship the whole thing to someone for repair... By the way, my...
  14. Dylan

    The Definitive Guide to Fixing Your CPS2 Multi Kit

    Thank you! After trying the multimeter, I tried switching (what I think are) the CLOCK and DATA wires so that DATA goes to CN9 #2 and CLOCK goes to CN9 #4. Now I get a white screen after a few seconds instead of a black screen. I’m not exactly sure which pins you mean by FPGA #1 and #2.
  15. Dylan

    The Definitive Guide to Fixing Your CPS2 Multi Kit

    Thank you! I tried reversing the connector (it should be easier to see the connections in the below photo). Also tried re-shorting exc5 just in case. Still black screen — does this provide a better visual? Thanks for the help!
  16. Dylan

    The Definitive Guide to Fixing Your CPS2 Multi Kit

    Thank you for the detailed instructions! I removed the battery and shorted exc5 (at least I think I did after pressing a screwdriver against the posts on the bottom and top capacitor of the board) but still black screen. Sorry for the poor photos- the ribbon wires are actually swapped on the...
  17. Dylan

    The Definitive Guide to Fixing Your CPS2 Multi Kit

    I used a live (not suicided) type 7 Giga Wing B board PCB and carefully removed & preserved the ROM chips, assembled all boards, and soldered the 4 wires. Upon rewrite the LCD reads “Have Fun!” but I get a black screen. The board still has the original battery installed (see pics). Does the...
  18. Dylan

    Darksoft Taito F3 graphics tearing issue

    Updates: - audio noise was unrelated to positioning of the data cable. After firmly re-mounting the Darksoft PCB on the F3 motherboard this has been resolved. - missing Zone D background images have been resolved via patches (thanks!) - graphics glitches in specific scenes & areas of the screen...
Top