Search results

  1. BroadwayJose

    MiSTerAddons MiSTercade - MiSTer for JAMMA cabinets

    The volume knob on my remote works fine with stereo out, which is how I get audio from Mistercade. Might be just for that and not for the jamma mono audio?
  2. BroadwayJose

    Astro City marquee light replacement

    Looks like 24" length is needed for these cabs. Thanks for the responses and confirmation. Likely will bypass the existing fixture and just use the replacement as-is. What should my wiring look like in this case? I'm not sure what the color scheme is in the cab to line up with the replacement...
  3. BroadwayJose

    Astro City marquee light replacement

    Right, but that's for a *new* Astro City, which I said I don't have. I found that thread also. Would be good to have feedback from another Astro City owner who has gone through this if possible. I don't want to make mistakes here in case there's a size difference for the light between each cab.
  4. BroadwayJose

    Astro City marquee light replacement

    Not sure if my search skills are lacking but I can't seem to find info on the marquee light for the original Astro City cab. Seen some stuff for the New Astro City but I don't have that cab for comparison and I'm not sure if the same size and type light bulb will work here for me. Mainly...
  5. BroadwayJose

    Gifted NAC Restoration Thread

    @kikaso can you confirm the size of the knurled thumb nuts you're using for the control panel? I swap panels often on Sega candies and making that job quicker would be awesome. Great job on the restore btw. This has been very enjoyable to follow.
  6. BroadwayJose

    How to get the pixel/dot clock of an arcade game for the OSSC

    @Layer33 I had no idea these mods and options existed. This is great, I'll read through that thread for sure.
  7. BroadwayJose

    How to get the pixel/dot clock of an arcade game for the OSSC

    @Paranoid_Andy can you detail the OSSC mod and settings necessary for the Taito F3 capture?
  8. BroadwayJose

    JAMMA Extension Harness

    Thank you for the clarification @Crown Arcade Shop. I will reach out directly soon.
  9. BroadwayJose

    JAMMA Extension Harness

    @ImportantBet I assumed that would be the case but I wanted to make sure so that I can plan my config accordingly before making a purchase. Would be good to hear back from OP in case there are options available for a -5v module.
  10. BroadwayJose

    JAMMA Extension Harness

    @Crown Arcade Shop to be clear, does this harness include the option to create -5v or just support it if the power supply already does it? In my case, I would want to use this in a Versus City cab but my power supply does not come with -5v. I have options to make it all work either way but I...
  11. BroadwayJose

    How to connect namco system 246&256 to HDMI large screen TV

    It's mostly Tekken 5 DR but I'd like to see a list of what games support each resolution if that's out there. I wasn't aware there were limitations per game.
  12. BroadwayJose

    How to connect namco system 246&256 to HDMI large screen TV

    This is all good info and likely the method I will take as well re: OSSC. I just really need to know the right dip settings on the 256. Whatever I've tried so far doesn't produce a 480p signal in my testing. I can get the low res signal just fine but as you said the IO board softens the image...
  13. BroadwayJose

    How to connect namco system 246&256 to HDMI large screen TV

    What are your dip settings on the 256? I'm assuming you're getting 31khz straight from the board in this case and into OSSC, correct?
  14. BroadwayJose

    Console JAMMAizer! Easily connect home consoles to your JAMMA arcade cabinet.

    That's encouraging and thanks for sharing your results. I don't own a PAL Wii, so I'll likely need to get creative in terms of getting compatible video out of my NTSC console. @JohnRambo'sKnife this is a jamma device by design. In your case for a JVS system you may need to explore other options...
  15. BroadwayJose

    Console JAMMAizer! Easily connect home consoles to your JAMMA arcade cabinet.

    Not familiar with wiiflow so I can't comment on that. As far as the controls go, as long as you're running a jamma setup there's no need to physically rewire anything. What is needed for any console would be a controller PCB (I'm guessing something that supports Gamecube should work assuming...
  16. BroadwayJose

    FS High Quality Convergence Strips for your Tubes

    I would like a 20 pack. Thanks!
  17. BroadwayJose

    Unico phoenix monitors - Opinions?

    Thanks for the info and breakdown @ToddG Is this maybe salvagable with a different driver board?
  18. BroadwayJose

    4 & 5 button via JAMMA

    If you have a CPS 1 or 2 style kick harness already installed, a JNX Atlas board can be used to reroute button 4 & 5 to the kick harness. I use that for Atomiswave on my Sega cabs, it's clean and I like it because I don't need to rewire anything.
  19. BroadwayJose

    Is there a good case/box option for supergun set ups?

    UD-CPS2 is unobtainanium now and it was always a pretty specific use case from the start, given the intended input and output options. Maybe not even the most optimal or useful solution these days given i haven't used it in a while as I perfer to play more on cabinets and MiSTer setups lately...
Back
Top