Search results

  1. Lemony Vengeance

    Sega Lindbergh Universal AIME wiring

    ok, it's time: https://www.arcade-projects.com/threads/interest-check-p-ras-aime-home-button-and-card-reader-harness.16721/
  2. Lemony Vengeance

    Interest check: P.RAS/AIME home button and card reader harness

    Guys: I have enough mats to make 50 (fifty) total P.RAS/AIME home button and card reader harnesses. These harnesses consist of the following: 1 Home button 'B' harness (2 pin to QD) 1 home button 'A' passthrough harness (cabinet with Diode solution to home button 2 pin, power and gnd to card...
  3. Lemony Vengeance

    Sega Lindbergh Universal AIME wiring

    Parts are slowly rolling in for the P.RAS/Ringedge multi home button and card reader harnesses I will be doing a batch of. 50 complete harnesses:
  4. Lemony Vengeance

    Harnesses and other adapters by Lemony Vengeance

    Parts are slowly rolling in for the P.RAS/Ringedge multi home button and card reader harnesses I will be doing a batch of. 50 complete harnesses:
  5. Lemony Vengeance

    Pre-Order For Capcom Mini Cute Production

    ooohhhh have enough spares to let me pick up another one?
  6. Lemony Vengeance

    Sega Lindbergh Universal AIME wiring

    update on my end, Thanks to help from @Cereth with graciously providing reference harnesses (and gentle prodding and reminders), This is the next mass-produced project I have on my bench This will be a full kit, meaning Serial cable - 4 ft (605-022?) (thank you for the pinout above...
  7. Lemony Vengeance

    Sega Blast City part

    I think I have a right angle connector for ya
  8. Lemony Vengeance

    SFCtoJAMMA - anyone familiar with this?

    1) Correct 2) the grounds are common in the adapter, and are going to the same pins on the edge. I wonder if voltage to the controlers is not common, however.
  9. Lemony Vengeance

    SFCtoJAMMA - anyone familiar with this?

    hey all, I'm working on building out an SFCtoJAMMA adapter using MikeJMoffatt's code for a teensy++ 2.0. The info is located here: GitHub - Mikejmoffitt/SFCToJamma: Decodes an SFC/SNES controller into simple inverted output I've downloaded the INO, programmed the teensy, wired everything...
  10. Lemony Vengeance

    Sega Blast City part

    The Screws are still in the posts. I rebuilt this cab from the ground up for him :D he just needs the frame the smaller remote boards fit into.
  11. Lemony Vengeance

    Harnesses and other adapters by Lemony Vengeance

    I do, actually. I should make a bunch of them up. they take a bit of work, understandably.
  12. Lemony Vengeance

    Pre-Order For Capcom Mini Cute Production

    hey man, I'm good with waiting for the yellow ;) this should surprise no one.
  13. Lemony Vengeance

    Harnesses and other adapters by Lemony Vengeance

    Also added some sega extra button harnesses to the stock. They can be adjusted to work with naomi cabinets as well.
  14. Lemony Vengeance

    Harnesses and other adapters by Lemony Vengeance

    Hey all! JVS voltmeters have been restocked! they're longer this go around (2 feet)! They're also robust AF!
  15. Lemony Vengeance

    Pre-Order For Capcom Mini Cute Production

    can't wait, my dudes. Thanks for the pics, @hursit :D
  16. Lemony Vengeance

    Harnesses and other adapters by Lemony Vengeance

    Shoot me a pm and I’ll get ya sorted :)
  17. Lemony Vengeance

    Harnesses and other adapters by Lemony Vengeance

    Hey y’all. Been a long time. Took some time out to do some Halloween prep: also spent some time filling stock! I have a bunch of Taito J and K harnesses (as requested) ready to go! Let me know if you need some! I also have sega cp harnesses ready to go as well.
  18. Lemony Vengeance

    WTB CPS2 to Blast City kick harness

    I'm taking things VERY slow. Covid had me on the ropes for a minute there, but I kicked its ass. but I can definitely get this done up for ya.
Top