Search results

Is anyone willing to help me out and take a look at this board for me. I’m still looking to have this repaired and finding it hard to find someone. USA is preferable but not necessary thanks

The guy I sent the board to for repair isn’t sure what to do anymore after reflowing the chip at U9. It helped some but did not fix Is it possible you can tell which 4245LV it is so I may tell him which one to try to replace? If not may I send it to you for repair? thank you

My multi just asked me when it will be getting this selector and I’m not sure what to tell it 😉. Any updates on this project. I paid about 6 months ago.

I sent the board to a guy local to me to take a look. He reflowed chip at U9 which made an improvement but did not fix. Any recommendations on where to go next from here?

So far I’ve only tried ringedge 2 with multi. I’ve switch between bunch of games and quickly tested controls. I’m still only using the default profile and never set up own profile on sd card yet so not much I can add yet as per that part of setup. The only issue I’ve come across so far was when...

Finally got around to hooking up and testing things. I powered with only 5v via usb and I’m just using it outside of a cab with ringedge 2 on default profile with a db15 controller. All seems great so far. Thanks guys!

I believe if memory dongle died you can just use a new usb dongle and on boot system it will format it. I think that’s what I did. I have an 8gb sandisk dongle for mine currently.

I had something this happen a while ago with a chassis I no longer have but it only made that noise for me when I had the brightness(screen) on flyback cranked up to high. Does lowering screen knob on flyback affect the noise at all?

I got one of their abominations a few years ago too but mine came in a lot worse shape. It was totally striped of everything and missing all the parts including the marquee. Parts are hard to come by. I tried but I couldn’t find enough so I ended up putting all Astro city guts including monitor...

There is also a model of it on thingiverse you can print yourself https://www.thingiverse.com/thing:4289628

Spent a little more time looking at this today and notice something I didn’t see before. When I touch the chip at U9 the garbled graphics change up a bit. It does not fix it or make it look right but it’s the only place on the board that changes any graphics output when touched lightly. I see...

I’ll take 1 please. Pm sent

Any other suggestions of what I may try to fix/narrow down issue or @Mitsurugi-w do you have time to fix this for me if I can’t solve this?

I tried a few original carts and they work fine. The issue only appears when using the multi board

“Mostly ok” sounds hopeful. Is troubleshooting this something easy to do? Or do you have a recommendation place to send for service?

I downloaded both folders to test from here. Both passed and said “All done: Have fun!” then showed “Now playing:” along with each folder number and started showing garbled text and kept rebooting. I’m assuming that is normal behavior since it’s not really a game to be played. I then tried...

Thanks for the advice guys. I will try to flash 01010101 and 10101010 tomorrow and report back how it went.

I put my F3 multi back in my cab today after being on a shelf for about a month and now I have graphical issues on all games on multi. I tried a few normal carts and they work fine without any issues so I am assuming it is the multi board and not main motherboard. I checked voltages and it’s...

Get the lube

Pm sent