Search results

  1. Zepherino

    Cheap third party chassis option for WG 25" with CGM-2500?

    This website also has some information regarding rejuvenators. I haven't had the need to use my 467 yet, but I've been gathering up info here and there for when I inevitably do. https://crtdatabase.com/faq/bk-precision-490-and-467-crt-tester
  2. Zepherino

    Best Dolly for Candy Cabs in America?

    Memory unlocked for me. Years ago when I helped out with some retro gaming conventions, I used several dollies to haul cabs around, and while the COSCO is the most common, the best one to use was an old Magliner that my friend owned. The nose plate is pretty distinct and just reminded me of...
  3. Zepherino

    DARKSOFT CPS1 Multi - Support thread

    My multi was already set up in terms of the SD card before it came into my possession, but I'm fairly sure it's from a multipacks directory listing from a certain archival site. If people need more info beyond that just PM me and we can sort it out.
  4. Zepherino

    WTB Options for Candys with Rotate Monitors?

    How deep is your wallet? Pretty much any cab with a rotation mech is fairly uncommon in the US and will command a very high price. High enough that you might be better off buying two Astros to dedicate to each game type if you have the space. Monitor rotation with an Astro isn't that hard either...
  5. Zepherino

    DARKSOFT CPS1 Multi - Support thread

    I tried a few different Red Wave and Rainbow Edition hacks, along with the SF2 Mix fan game, and they all seem to work just fine for me. Or at least they worked afaik given how janky these games are. Pressing start would change characters, and typical shenanigans that I know about for shotos...
  6. Zepherino

    DARKSOFT CPS1 Multi - Support thread

    I finally got around to working on this install again and I have resolved the issue with some help from a friend. I thought I had a unmodified C board when I removed the battery, but upon closer inspection there were some cut traces on pin 45 and 46 of the B-21. I soldered those pins to ground...
  7. Zepherino

    FS Account hacked, be smart

    What's pretty scary is that the scammer seems to know enough about desirable arcade hardware to price stuff that isn't in "way too good to be true immediate red flag" territory, and also include correct photos of everything. This person did some homework if they weren't already familiar. The...
  8. Zepherino

    Where do you buy your acrylic and other cutting materials?

    Not really a 3D printing question but somewhat adjacent: For laser cutting people, where do you normally get your supply of acrylic and other cutting materials? I have a local spot, and I'm aware of TAP Plastics as a known good source. I also know that Amazon has a bunch for cheaper, and I'll...
  9. Zepherino

    Bambu Lab boiz

    In comparison to the MMU2S, it's way slower (granted, getting that cursed thing to a reliable state in the first place is an adventure). I'm glad it doesn't take you long to fix the issues, but from my perspective I find the process of getting to the AMS to be very annoying for something that...
  10. Zepherino

    Bambu Lab boiz

    I'm well aware that most issues are addressable. It's death by a thousand cuts for me in terms of the myriad of things that I don't like, and that's on top of the fact that while I use the X1C fairly often in my firm, I don't actually own it, so I'm reluctant to do or buy things for it in the...
  11. Zepherino

    Bambu Lab boiz

    Like I said, the printer is decent, or even quite good. I still prefer my Prusa, but it's largely personal preference. I'll go a bit into the nitty gritty on this. I dislike the slicer and how it's basically a Prusa Slicer clone but even more unintuitive. The printer also heavily relies on QR...
  12. Zepherino

    Bambu Lab boiz

    I use a X1C with AMS at my work and I think it's a pretty decent printer so far in the 50-100 hours of print time I've used it. However, I personally prefer my MK3S with MMU2S so far for a variety of reasons (mostly maintenance related, but lots of small usability issues as well). I had a Prusa...
  13. Zepherino

    Possible 29in 4:3 LCD for retrofitting CRT cabs

    Seems fairly interesting. 29.4" is pretty large (candy cabs are 27" viewable, and USA cabs like Dynamos are normally 25"). $600 is a pretty high price point though. Response time refers to pixel response, and not input lag or total display delay. It's slowly changing, but manufacturers don't...
  14. Zepherino

    DARKSOFT CPS1 Multi - Support thread

    I don't have one on hand, but I will try if I can manage to borrow one.
  15. Zepherino

    DARKSOFT CPS1 Multi - Support thread

    My PAL chip came in and I tried the install. Unfortunately, I only get some colored lines on the left side of my screen when I power it on, and no display from the LCD game selector. So far I've tried: - Double/triple checked the wires for Reset and Qsound (One minor thing to note is that the...
  16. Zepherino

    Received a faulty item from Yaton

    It may very well be deserved. I've never actually bought from Yaton before so I don't have a strong opinion on the matter either way. There's enough issues out in public that I would avoid if I can.
  17. Zepherino

    Received a faulty item from Yaton

    I should have been more clear. KC is a well known arcade cab seller in Southern California who is also banned from Arcade Projects for reasons similar to Yaton (mainly poor communication).
  18. Zepherino

    Received a faulty item from Yaton

    Use the search function on this forum and you can quickly find that Yaton was banned from Arcade Projects a while back due to numerous issues with numerous forum members. While I wouldn't call him a scammer, he is known to be risky to deal with. In a way, it's a similar situation as KC, if you...
  19. Zepherino

    Ideal PC cases for Arcade PCs

    I saw this on LTT and thought it could be a interesting/expensive case option. Somewhat compact, but includes an integrated trackpad, keyboard and mouse. With a JVS to USB solution, it could be a portable TTX setup that will still fit inside cabs...
  20. Zepherino

    DARKSOFT CPS1 Multi - Support thread

    I'm going through the process of installing a CPS1 Multi right now and noticed that the replacement A board PAL chip in my kit is missing. Is it possible to buy a replacement or to get the data on the PAL and burn it myself?
Back
Top