Search results

Unit only. Fully functioning and ready to go. $100 shipped in U.S.

I finished mine this weekend. Like you, I have no trackball to hook up but was curious enough that I ordered one.

The newest of the RetroTink 2X family with 480p support. Latest firmware also adds 720p and 4:4:4 480p. Device only, no cables included, $99 shipped to Conus. https://www.retrotink.com/product-page/2x-multiformat

It’s funny, I came across this board by pure luck while looking at info for the multicart jumper extensions. The video was already in flight but this was a nice addition and really helped make the ST-V easy to run in the Big Blue.

Is the code for these available for us to burn on our own? I have a few bare boards that I'd like to try and populate. The Darksoft versions of Rampage and UMK3 will only run for me with a genuine U64 on the board.

That’s a steal.

Yep, grabbed one. Now I need a shell.

I was actually wondering if a restock was coming since both vendors are now empty. Seems like a hot multi and the hardware to get running is relatively cheap compared to some others. I’d pick one up if they go back in stock.

The last of the Wolf boards here. I’ve looked for broken traces on this one and have even reburned the image roms but have yet to determine what this is. All roms come up green, sound and voltages are ok too. I’m guessing this is a bad chip or component somewhere on the board?

Wanted to stop back and say thanks. I replaced the battery holder and all returned to normal. Much appreciate the advice. On to the next board.

Will do, thanks man.

I have a Midway Open Ice board that shows green on the check screen screen, but which produces only buzzing noises during gameplay. It seems this is often a -5v issue, and I checked that and am good on that front. I also get a CMOS error upon boot and am unable to perform a factory reset in...

Even simply providing the scan would be a huge step in getting this off the ground. Thanks.

Nice one, glwts. The original labels on these seem to peel and bubble much easier than other carts.

I'm going to have to replace the speakers in my Midway SportStation cab. It looks like they are 25W, 8ohm, 5 1/2" speakers. Originals can be had here, but was wondering if there are better options available.

Just like the title states, I'm looking for a Midway Open Ice PCB. Feel free to PM, thanks!

I replaced my glass with a much better one this week. A lot of the characters were missing paint or scratched. The new one I got is probably a 9/10. I'm thinking of getting new chrome T-molding next.

I'd love to see someone use something like this for a Virtua Fighter CP repro. It wouldn't completely give the mirrored effect, but it's been a long time coming and there isn't much out there.

Last night I popped in Nine Dragons just to verify normal carts were fine. I booted, then went into settings and did a system reset. I powered down, took out Nine Dragons and booted Espgaluda which then loaded normally. I then swapped to Ketsui and had garbled graphics again. Repeated the...

Thanks for the replies guys. Voltages are good, and I cleaned both the carts and the connector on the board. I've noticed now that a little added pressure on the cart affects the sprites. I'm going to try swapping some shells to see if one doesn't provide a better fit. EDIT: Swapping shells...