Search results

  1. XianXi

    JNX Spitfire - JAMMA Rapid Fire Inline Adapter

    Thanks to those that emailed/messaged me, I now have 3 units remaining in the batch. I do give volume discounts when buying more than one unit.
  2. XianXi

    JNX Spitfire - JAMMA Rapid Fire Inline Adapter

    I have a very small batch of Spitfire's coming in. If anyone is interested the pricing is below. Just shoot me a PM if you want one. Knobs will be different from past batches but work the same. Basic - $30 w/Voltmeter - $36 add -5v Generator (Mounted) - $7 Shipping in the US would be $6...
  3. XianXi

    Primal Rage - Supergun power issues

    Did they try to desolder the broken leg of that resistor? I hope they didn't rip out the plate-through as that could cause a short. All they had to do was add a little solder to it and reattach.
  4. XianXi

    Primal Rage - Supergun power issues

    Add a jumper wire from FG to COM.
  5. XianXi

    Primal Rage - Supergun power issues

    For powering PR, you need a power supply that has a decent max continuous output. CBOX needs a better power supply, the Windy Supergun is capable of more but there is no adjustment pot for the 5v rail. I never measured the actual draw on mine but I'd guess it's about 60-70 watts (+5, +12 and...
  6. XianXi

    JNX Sega 839-0158 Repro Headphone Board

    I have to check if I have all the parts but I do have most (off the top of my head). Shoot me a message if you need any.
  7. XianXi

    JNX Sega 839-0158 Repro Headphone Board

    Sorry didn’t see your post, yes, I have them listed on eBay.
  8. XianXi

    MVS 4 slot (MV4F) board repair help

    Check for bent pins or solder bridges on the GPU which is the LSPC.
  9. XianXi

    Is there a list of cps3 error code?

    Do you think it's maybe a board issue then since it stays the same no matter where the simms are or maybe a bad disc? Can I use like a CDR in the drive with a different game and see if it flashes correctly?
  10. XianXi

    Is there a list of cps3 error code?

    Nope, I don't own any CPS3 stuff.
  11. XianXi

    Is there a list of cps3 error code?

    Ah, tried cleaning the pins and swapping simms (3,4,5,6) around and still got "Error Code 60". Then I swapped simms 1&2, tried to rewrite again and timer went to zero and still got the "Error 60".
  12. XianXi

    Is there a list of cps3 error code?

    Which simm would be the issue with an error code of "60"? It didn't freeze, counter went all the way down to zero then got the error. Should I reseat the simms?
  13. XianXi

    WTB WTB: CPS3 Superbios Chip - Non Paypal

    I know of them but not wanting to wait 3-4 weeks.
  14. XianXi

    WTB WTB: CPS3 Superbios Chip - Non Paypal

    I need one of these chips but I don't have the equipment to program my own and I don't have Paypal. I only have CashApp, Venmo or Zelle. PM me if you can sell me one. Edit: Either that or if someone can be a Paypal mule for me.
  15. XianXi

    SF3:3S Not Booting Up

    Battery is still at 2.9v in the cart, CD drive spins but nothing happens on the screen. Tried cleaning the cart edge, no difference. Voltage level is good all the way to the CD rom drive. I just get a black screen. I keep seeing people talk about converting the cart to a "Superbios". Would...
  16. XianXi

    JNX Shift - A Neo Geo Adapter (Open Hardware)

    J1 just shifts between pin 4 piggybacking pin 9 which are both "Neo D". Edit: That probably didn't answer your question but I no longer have the files as I deleted them, if you look at the footprint, you can see which side is blank and the other to the pin.
  17. XianXi

    MV1B1 Stuck in service mode

    Check the resistance on the CRE401 that the test button goes to from the JAMMA edge. To test it, you need to check both the input and output pins between VCC. For example, if from the JAMMA edge it goes to pin 2, then output is pin 3. Resistance from Pin 1 to pin 2 should be 1k ohm, from pin 1...
  18. XianXi

    Pandora's Box DX buttons not working

    If the middle part isn't showing continuity, I'd take anything in the middle out and inspect it outside of the cab in better light and test continuity on that harness from one end to the other.
Back
Top