Search results

  1. nnap

    Sega System 18 Rom Board Case

    Let me dig them out :)
  2. nnap

    Irem m92 no sound +funky colour problem

    C-Roms are for GFX tiles, so that would account for graphic issues. Does the problem change when running the board without that mask rom?
  3. nnap

    Minigun Supergun - An Open Source Supergun

    you are using the component input on the gbs. I think you should use the CGA/EGA input on the left of the VGA input connector where you can feed RGB and sync.
  4. nnap

    Sega System 18 Rom Board Case

    Sure, I cut them on my Silhouette. The design itself is in Corel Draw. So I have that plus the exported image itself. Can also print/cut a bunch and send out.
  5. nnap

    Sega System 18 Rom Board Case

    Finished the work on the S18 Multi enclosure. Thanks to VJP for lending me his multi! Can be found here: https://www.printables.com/model/847985-sega-system-18-multi-case
  6. nnap

    Cyvern Conversion

    Very nice design! Do you have spares of these or are the gerbers available somewhere?
  7. nnap

    Sega System 18 Rom Board Case

    Thank you for checking. The adjustments were for an original short rom board. It is pure luck that the multi fits at all. Once I get the multi I will make a dedicated design for it with proper cutouts for the selector. Also agree, the shell will be even shorter.
  8. nnap

    Sega System 18 Rom Board Case

    Printables page is updated with the 2 new SLTs for the small case.
  9. nnap

    Sega System 18 Rom Board Case

    Thinking about it, I could make the case for the short board shorter. This way it will fit on smaller print beds. Same for the case for the multi.
  10. nnap

    Sega System 18 Rom Board Case

    I should get the multi from a friend on Saturday to adapt the enclosure, so there will be an update for that soon. I was thinking about a knob that goes on the selector. This way you could put a label on the case with the game names based on the position of the knob. My printer is an Bambu Lab...
  11. nnap

    Bambu Lab boiz

    My Prusa MK3S+ was acting up. Even after replacing all the bearings, plastics and hotend it is still a mess. Ordered an X1C with AMS a few weeks ago. Has been running almost 24/7. Had a bit of a struggle with PETG but then found a profile online that works great. Super happy with the results and...
  12. nnap

    Sega System 18 Rom Board Case

    I had a few Sega System 18 rom boards that I wanted to better protect. Came up with a case design that fits both the short and long rom boards. Let me know if I can improve the design. You can get the files here: https://www.printables.com/model/836536-sega-system-18-rom-board-case
  13. nnap

    MITSU CPS1.5 Multi Spinner PCB and Cables

    No, the LS-30 work completely different from a spinner.
  14. nnap

    A Freeware Taito TypeX Multigame

    As far as I remember there was an option in the config file of the game to do so for some of them.
  15. nnap

    Cyvern Conversion

    As far as I remember, sengeki only works on asia/jap regular bios with the respective eproms.
  16. nnap

    Sen kyu/battle balls bios help

    by local I mean in your country :) this is a global community.
  17. nnap

    Sen kyu/battle balls bios help

    You just need an eprom reprogrammed on the senkyu cart. I am sure there is somebody local to you that can programm that eprom for you.
  18. nnap

    Bambu Lab boiz

    Very nice. Am also thinking about getting an X1C. Any recommendations for PLA/PETG filaments that work fine with the X1C?
  19. nnap

    Play Puzzloop with Spinner on Kaneko Super Nova

    Read somehwere that you can switch the Super Nova Motherboard into Spinner / Knob mode. After some digging and trial and error I managed to get it working. To enable Knob mode you have to put DIP 1 to on which will put the board into test mode on startup. There go to the System Configuration...
  20. nnap

    Sega Trackball RGB LED mod

    Just ordered one to complete the set.
Back
Top