Search results

  1. Orakelschaf

    Question about some missing components on a ST-V

    I got a ST-V from a friend, which is currently not working. I found some missing / altered components on the pcb and would love to know why those were altered. Maybe some kind of mod i don't know of? The board was working fine with those missing components - This is not a request for help on...
  2. Orakelschaf

    I need help , naomi 1 stuck in loading

    What does the screen show while game is "stuck"? Can you still access set setup screen while the game is "stuck"?
  3. Orakelschaf

    3D printed replacement cases for carts

    Some updates: socketed chips (on the program board) is not a problem at all. Not sure what i did wrong, but it fits perfectly (and tight). No issue there! i grinded down the pcb facing pillars on the bottom shell - Gap is not 100% gone, but much much better now! (no clue how much i have taken...
  4. Orakelschaf

    3D printed replacement cases for carts

    Finished printing the shell and it is a nice design! Thanks a lot! printed with PETG 0.2, with support on screw holes with brim Looks like i got minor bending (does not look like warping) in my print, which causes some gap issues - Will reprint it in PLA to check if the problem exists with...
  5. Orakelschaf

    3D printed replacement cases for carts

    Top shell is printed. - Fits nicely! Printing bottom now and will commment on it later ( i think i got some minor improvement suggestions then)
  6. Orakelschaf

    3D printed replacement cases for carts

    You heat the inserts (f.e. with a soldering iron) and melt it into the plastic - https://www.amazon.de/-/en/gp/product/B088QJG676 (M2 inserts) - https://www.amazon.de/-/en/gp/product/B09BMK4BK1 (soldering tips for inserts) View: https://www.youtube.com/shorts/J4Fz8DlwFyo View...
  7. Orakelschaf

    3D printed replacement cases for carts

    - printing on a bambulab A1 @ 0.2 - slicer estimate was 6hrs, but i guess it is closer to 5-5.5hrs in total (for both sides!) - the prusa mk3s is a very nice printer, but showing its "age" (=slower with same quality output) - if your design is better than the old one i will have to reprint all...
  8. Orakelschaf

    3D printed replacement cases for carts

    Thanks a lot for sharing. Print time: 6hrs :D
  9. Orakelschaf

    Rust removal from Naomi Universal - best approach?

    grind in a space where you are okay with fine dust -everywhere- (use a mask!) I bought a cordless multitool with an grinding attachment. That helped me a lot! (manual grinding takes ages) I would use mate paint, glossy can be tricky Don't expect perfect paint if you haven't done it before. Don't...
  10. Orakelschaf

    Rust removal from Naomi Universal - best approach?

    Disassemble completly without removing the rivets (remove sidepanels, remove coin door). Sand it, repaint. If you really enjoy adding more work you can drill out the rivets and replace those. - I wouldn't. I have repainted two NUCs - one had a lot of rust.
  11. Orakelschaf

    Rust removal from Naomi Universal - best approach?

    Which rivets? - Photos please! A NUC can be completly disassambled (screws) Edit: I think i understand now: You really mean the base which has rivets. - I would just sand it down (i used a multitool for that purpose) and repaint.
  12. Orakelschaf

    3D printed replacement cases for carts

    I don't mind testing/printing either - Just let me know when you need feedback :)
  13. Orakelschaf

    3D printed replacement cases for carts

    M2 inserts - M3 is too large! (tested it). Using M2 inserts in current design: the hole needs to be drilled. Don't mind the glue in the photo, was a test to strengthen the sctructure (hint: did not work). Keep in mind that M2 screws heads are too small for current top holes! In the current...
  14. Orakelschaf

    3D printed replacement cases for carts

    I worked with M2 heat inserts - worked fine. Problem are those screw pillars which need more reinforcement (some weird shape which does not break on screw turns) on the base^ Can post some photos of M2 inserts on the current design.
  15. Orakelschaf

    3D printed replacement cases for carts

    Hope he is well! ... would be awesome to have an improved version of the case!
  16. Orakelschaf

    3D printed replacement cases for carts

    I printed like 20 of those shells by now (all for friends). As i wanted to use heat inserts i had to trill the screws holes a bit (which weakened the structure a bit). As nice as i thought that idea was: Sadly the screw towers are not built for any force while screwing :( Is the original file...
  17. Orakelschaf

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Sadly Naomi setups can be faulty without a reason. check your wipi configuration if the wipi LAN is still in the same network as die netdimm check if you really use a crossover cable / cable is not faulty if you own a network switch: attach netdimm and the pi to the switch to check if both...
  18. Orakelschaf

    Naomi Pi 'WiPi Netbooter' - compatible with Pi 3&4

    Does the setup menu of the Naomi show "network"? - If not try to reseat the netdimm.
  19. Orakelschaf

    [SOLVED] DDP2 Bee Storm - Graphic glitches and wrong caps?

    My problem is solved, tinkered a bit around and it is the PGMs, not the card itself. The card seems (compared to other games) picky. (in my case) it is not the slots. I switched slots on different pgms and the issues stayed exactly the same! my sound issue on one of the pgms is a broken volume...
  20. Orakelschaf

    [SOLVED] DDP2 Bee Storm - Graphic glitches and wrong caps?

    My guess is the same. Can anybody have a look at their cards and tell me if 47uf 16V for C5 and 100uf 16V for C4 is correct? - Does anyone see any alterations to my pcbs, besides the two caps? Thanks a lot for the advice. Cleaning contacts is the first step i do on "new" games :) - My wildest...
Back
Top