Search results for query: *

For those looking to mod the stock stick, especially if it's gotten too loose from wear: if you don't wanna go through the trouble of replacing the entire stick, drop in an LS-56 spring in place of the stock one. It's nearly the same diameter and fits great. It's slightly stiffer than a JLF, so...

I have a 3-6 that was showing video fine but no audio. I thought a cap kit was in order. Did a full cap kit from console5, triple checked my work. Went to turn it on, no video or audio. Red LED on the board was not lighting up. Checked the power circuit. LM2576 was showing 9V on input but 1V on...

Perfect for retrogaming. Beautiful picture. Calibrated nicely. Multiformat NTSC/PAL/SECAM CRT pro monitor. 15Khz with RGB, composite, and audio ins and outs. Works great. Heavy duty flight case. SCART adapter available by request. Missing front glass and control cover. $275. (I have this on...

I have a few of these laying around. Should be plug 'n play on any TTX3, but I can't verify functionality. The titles are: Ultra SFIV Nesica Theatrhythm Lord of Vermilion III Would be sold in a lot as is. Any interest?

Any thoughts on this one? B-Board is clean, no damage. A-board is working. All ROMs verified. Burned new PAL-G. Trying to use Phoenix set, but tried Avalaunch as well, same thing. Jumpers are correct and verified continuity.

I'm interested in setting up a test rig for Groove Coaster. What do I need besides the following to have a complete working setup? GC Joysticks TTX Zero PC w/ GC HDD and power brick 3-PCB IO stack 3.5mm to amp/speakers 1080p? HDMI monitor Card Reader? Cabinet PSU?

Looking for a yoke for a TC-A292 chassis I have. Helpful to have the associated wiring too, like the power and video cables, etc. Would've been used in the MV-U2 and U4/29 series of early Neo Geo candy cabs, the blue and white ones, possibly others. Can trade for equivalent Nanao MS9 parts and...

In 2021, I had an idea to use the arcade hardware sitting on my shelf to raise money for charity. I’ve been keen to make sure that every so often I do something, even something small, for those less fortunate than myself. I think it’s an important thing for everyone to try to do, no matter your...

I was wondering why certain games will always reload correctly no matter how long the board has been powered off, but other titles need to be re-flashed after every dormancy longer than a few minutes. Dimahoo, for example, always comes right up no matter how long it's been off, but MvC (and most...

If I wanted to run a TTX3 multi in a Vewlix via Fast I/O but also be able to easily switch to a different system like an Xbox360 or Mister, what's the best way to do that? Wanting to use the Vewlix stick/buttons for everything.

Stock Taito x3 parts, sold as a lot only. All working, all good condition. $50 shipped to US. PM for elsewhere. CPU fan/heatsink Rear IO cover plate i3 2120 CPU MSI GTX640 GPU

My understanding is that the ARTAX multi is hard-coded for 1080p only. Besides replacing the monitor altogether, what are the options for using ATRAX in a stock Vewlix with the older 720p screen? Is downscaling possible?

Does anyone know if there's been any work to try and get the GS gun setup working for the gun games in the X3 multi? Seems like it would be a good fit since it uses Fast IO, in part at least.

Does the ARTAX TTX3 v4 image support online play for any of the online-enabled games? I haven't tried anything yet, just curious. Sorry if this was already answered elsewhere.

Anyone know of an LGA 1155 motherboard that will drop right into an x3? Needs to have a COM header and 8-pin CPU power connector, a 1x and 16x PCIE, right? Anything I'm missing?

Anyone have a spare? Any BIOS/Revision should be ok. PM offers with shipping to 19044 USA. Thanks

Anyone have a Lattice-compatible USB programmer? Something like this? In theory it seems like one should be able to at least read the existing FW on a FAST IO. It might be encrypted, in which case possibly not much use, but it would be really cool to be able to flash these things from 4 to 6...

I'm trying to put together a comprehensive list of verified FAST IO PCBs according to model number with 6-button support. Here goes: Supports 6 buttons, With JAMMA edge K91X1204A K91X1204B Supports 6 buttons, Without JAMMA edge K91X1202A K91X1243C K91X1252A Supports 4 buttons ONLY K91X1243A...

If you're looking for an X3 Multi IO solution to use with a JAMMA-wired cab or supergun for an that doesn't involve the $250 JAMMA Fast IO (K91X1204), get any one of the cheaper FAST IO units (I guess there's several), and a Pandora Box Home JAMMA harness instead. You'll need to sand down...

Thinking about getting an X3 Multi setup. I'd be using it with a JAMMA supergun and 1080p monitor, so I need something that has a JAMMA edge for controls and supports 6 buttons. It looks like my 2 options are the Taito FastIO w/ JAMMA (K91X1204) and the Sega JVS IO with JAMMA (838-13683). Is...