Search results for query: *

Hi Folks, I have a Sega CD Model 2 that I want to work - but the disc won't spin correctly - after a bunch of googling, etc. and looking at different repair blogs - I think that my unit is MISSING the metal ring on the spindle, that engaged with the magnet to spin the disc. I have looked and I...

Howdy All! More positive feedback for @cruzlink2! I have used him a number of times, and he is tenacious and fair! I had a CPS3 board with the P2 up button stuck - he was able to replace one of the chips with a donor board that he had. He turned it around in LESS than a day! Great service...

Hi Folks, Looking for both a CPS2 and a CPS3 Jasen case! Thanks, Matt

I have an asian A board 3 connectors are taller than the other - is this right? The sticker isn't on it anymore. I want to test it - so I am assuming I need to get an Asian B board? Matt

Using the new MMEC protocol it is able to both be a virtual memory card and you can also use OPL and load games from the SD card. This is pretty great for me since my hard drive has always been a little on the fritz. I did an initial load of about 10 games onto the SD card, and all works well...

Hi Folks, I just upgraded to the SVS (Scalable Video Switch) - primarily because I am using a tink4k now, and the integration with that is great. I have (2) of these switches - they have served me well and work perfectly fine. The *only* issue (on both) is that the MicroUSB connector is right...

Hi Folks! I need one of these chips - to get my CPS2 A board up and working again. I am having trouble finding anything out about this chip - is it a EPROM that I can program? Matt

Hi Folks - I got a cap kit from console5 - and am going to recap my Vectrex to see if I can get the image a bit sharper. Has anyone done this, and have any tips? I heard that in a lot of cases, its not a true "through hole" circuit board, so a lot of care needs to be taken when removing the...

Hi Folks, I have a eeprom burner that only will load .hex files. How do I convert a (what I think is a binary) file from mame into a hex file so I can burn it to an eeprom? Matt

Hi Folks, I was helping @bgwelistyl install the NeoGeo HDMI mod, and I ran into an issue where the kynar wire connected to R47 (Clock1) pulled up the resistor and the pad there. I was able to scrape off and bare some of the copper to the left of it, so just need to get a new resistor. The...

Hi Folks - continuing on with the sale of my PVM's, the last I am going to sell (keeping the 5") - going down in size, next up we have the 8045Q. https://crtdatabase.com/crts/sony/sony-pvm-8045q Once again - just a BEAUTIFUL, sharp picture, Everything works on this, all the dials are set to...

Hi Folks, I finally dug into my SegaCD (model 1) today and try and figure out why the tray kept opening and closing and wouldn't work. I got some new belts for it. I have it all apart, and while I can rotate the gear just fine and it pulls the tray and down - it seems to do almost a 360...

Hi Folks! I have my original Sony 34XBR800, almost 25 years old now! The picture is a bit out of adjustment - primarily geometries, etc. 1) does it have a service menu like the PVM's where it is pretty easy to adjust? 2) if not, does anyone know of a Sony Service Tech who does house visits...

Hi Folks - continuing on with the sale of my PVM's - doing down in size, next up we have the 14M4U. https://crtdatabase.com/crts/sony/sony-pvm-14m4u Once again - just a BEAUTIFUL, sharp picture - with 800 lines of vertical resolution it's hard to beat this picture. And, at 14" - ostensibly...

Hi Folks! Just got my Furrtek Fusion (MVS to AES converter) - and was able to test it tonight with my MVS darksoft multi (on my AES, obviously). It worked! Although - the hotkeys did *not* work, but not really a deal breaker, since you can just reboot the AES and go into the menu...

Well - it's time to downsize, so I am going to be starting with my PVM's (first the 20 inch) - for fun, I posted a picture of all 4 of mine - a true tower of power... :) If you are looking at this - you know this is the best 20" PVM that Sony ever made - 800 lines of vertical resolution, just...

I built this a couple of years ago thinking I would use it more, and I just ended up not - so, spring cleaning - time to clean things out a little bit. This is a MiSTER with 128MB of RAM, the excellent misteraddon aluminum case, asus wi-fi dongle, the amazing Mini LCD Monitor with built in...

Hello All! I have (0) CPS3 cart shells printed in Gray - its a ABS/glass filled filament - super nice and smooth. Free to whomever wants them - just drop me a PM. $9 for shipping is all you need to send me. All gone.

Hi Folks - selling my original GDEMU - bought back in 2018. Not entirely sure what the going rate on these is - but I will price it at $75 plus $8 for shipping. Drop me a PM!

Hi Folks! I *really* doubt anyone will need this, but just in case - I thought I would share. I have an old computer that I wanted to install an "internal" compact flash-> ide adapter, going into a PCIe adapter, so I could use the awesome tools that @rtw created for writing CF cards for...