Search results for query: *

Assembling N64 advance v2 pcb’s, I see a dot on one corner of the clock and I aligned it with the pad that had bold white silkscreen on one corner. The picture has one clock mounted and I’m pointing at the silkscreen corner with my tweezers for the next clock. Am I doing this correct?

I'm installing a cps3 digiAV and i have a later model board with the LS08 integrated not a breakout board like in the github with the IN1/IN2 pads for HS/VS. Marqs mentions the integrated version but I don't see where the HS/VS should connect on my board. My board is a 95682A-3, any advice much...

Hello, can anybody verify the following cap locations? C34 470uf 16v C1 470uf 16v C28 10uf 16v C30 10uf 16v C29 10uf 16v C37 10uf 16v C36 22uf 16v C38 22uf 16v C32 220uf 16v All my sprites are half missing, does anybody know which rom is responsible for sprites? Thank you.

Setting the Vewlix Jamma upscaler to passthru RGBHV 15khz @ 262P to OSSC 5x @ 1920x1200. The D-Sub in on OSSC will accept 5V TTL safely. The other option was to let the vewlix upscaler output 31khz 640x480 RGBHV then let the OSSC line double. I didn’t go this route because now I have the signal...

Hello, trying to identify this PCB. Previous owner had no information, no manufacturer or date on silkscreen. The edge connector is quite a bit smaller than Jamma. Trying to figure out what edge adapter I might need to safely plug it into a jamma cab. Thank you.

Re-capped A & B board Champion edition darksoft multi Auxn works power supply and db15–>USB HDMI CPS2Digital

I paid @Semload 395 euro’s 5 weeks ago on the agreement he would ship two cases in 3 weeks. The day of purchase he promised to send sega 16b case pics. Never heard back after I paid him, to this day not one pic sent. Have not heard from him since, I emailed him yesterday and got this response...

Just wanted to give a general thanks to the monitor forum. Have a backup Sanwa 1723D for my Cute and the pic is to wide. Recapped and it got better, ferrite core stuck in coil, soaked it and got it to turn. Not enough adjustment, after reading hundreds of posts discovered a ‘N’ and ‘W’ jumper...

Just wanted to throw a thank you out to @kcarcadegame. I put in for a mini cute last year with @kcarcadegame then ran into an industrial accident ten months ago and could not complete the transaction. @kcarcadegame held it for me the entire year passing up many offers. Today we finalized what...

Hello, Problem 1....My Jamma kit has scan pcb K91X1116E, I’m trying to understand the settings. The page in the Japanese manual is not cooperating with google translate. Currently my Jamma boards are displaying @ 640x480 in setting ‘0’ on my 1080p IPS’ Diamond blue Vewlix. I’m assuming this is...

I’m currently putting all my rgb consoles into a 42u upright, I’m ordering more shelves now. I’m totally ignorant with the server chassis world, specifically I’m looking for what cable management ties or clamps do you guys like best? This will eventually have 3 more consoles and a pc with a...

Can anyone confirm that all 24 wires are required on the AVIP cable? I did the XBOX side of the cable and damn that seems like a ton of information lanes? I couldn’t find directions other than match the numbers.

Hello, Linking two Vewlix off one TTx2 running orig SSFIV:AE, one cab running JVS k91x1147A and 2nd cab running JVS k91x1097c . The Link PCB K91x1115B has d-sub from TTx2 into ‘V’, V1 and V2 out to each cab. Audio from TTx2 into VS PCB ‘L’ with L1 and L2 supplying each cabs Taito sound card. Vs...

Irem72 multi/TaitoF3 multi.

Hello, my blast city puts out over and under 3.3v no problem as I adjust the POT. The 5V only gets down to 5.24 even at the rheostats minimum with the 12v @ 11.16v. To get my 12v to 12v I have to crank the 5V rheostat to 5.68v. So I recapped the power supply board and sound amp board with all...

Very impressed with the quality.

Hello, Vewlix L cab, everything works great with Taito k91x1147A JVS I/o board running SSFIV AE + dongle. My JVS card in the x2 is set to dip 1 on, 2-4 off, 5 on — per x2 manual. I install the fast I/o amp board k91x1204b with a nesica rfid and get a “JVS 0001 error: Node Over”. I’m running p1...

Hello All, Looking for a Taito type X2 Fast I/O Amp PCB K91X1204B, can paypal, venmo. Thanks!

Hey everyone, Long story short I walked into my house in early 2018 looked into the formal dining room and wondered why in the f... do i have two dinner tables, I had never ate in that room in nine years. Out of the blue I had this crazy idea of just putting one real arcade game in. I started...