Search results

  1. tiff_lee

    SEGA G-Loc: complete restoration saga.

    I seen a couple of old gloc deluxes running Afterburner climax . One was using a ps3 and the other a lindbergh but obviously neither had motion something you could possibly do with your custom setup. I was thinking what about changing pulley diameters on the motor/ballscrew. IIRC correctly the...
  2. tiff_lee

    SEGA G-Loc: complete restoration saga.

    Awesome work. I had been watching the progress of the repro boards on gamoover as I have one of these shame it hasn't been figured out yet. In your demo it looks like they're going a little slower than the stock speed? have you had them cranked up as I know steppers can get quite noisy. I...
  3. tiff_lee

    Blast City Speaker Replacement

    Still haven't got round to it, all my gear is under dust sheets i'm afraid. The group was https://www.facebook.com/groups/429399407089518 but as far as pictures its only those in the post you quoted there is nothing else. Unfortunately the guy who made them didn't want to share, his response...
  4. tiff_lee

    Guys, what the hell did I buy? Can anyone ID this 3D printed part?

    Yes, so many projects and poor stocktaking/notes on items I often find myself scratching my head
  5. tiff_lee

    WTB WTB - CPS2 Kitboxes

    If you get no joy there are package forwarding places you can use, I use https://www.stackry.com/en. I buy heaps of stuff from the US , have it sent to my address there where they will consolidate it all for you. It's definitely shady and customs may ping you but there is an option when you...
  6. tiff_lee

    Neo-Geo controller adapters

    Unfortunately Frank has been AFK from the forum for over 3 years now.
  7. tiff_lee

    Meanwell QP-150-3A 'mount'

    After taking a look the other holes for the top plate use a small coarse thread screw so rather then faff around with that I just deleted the holes and retained the two M4 holes on the other side, it isn't going anywhere. The 3MF file above to mount this way The 3MF file below to mount...
  8. tiff_lee

    SEGA System 16 Jamma Adapters

    Finally got round to finishing my wish version of this adaptor 100% inspired by Franks design
  9. tiff_lee

    Meanwell QP-150-3A 'mount'

    Not sure if this will be of use to anyone as I had a very specific use case. There are two small rails to locate the PSU with four countersunk M4 screws through the base into empty threaded holes in the PSU housing. The way I have it orientated does cover some of the side vents but there is a...
  10. tiff_lee

    Sega Megalo 410

    Oh so you already have a mirror? I just bought a cheap glass one from the hardware store, used the mount as a reference and just cut to that size, easy to do with the cutter just score a line and snap it off although wear gloves/mask obvsiously.
  11. tiff_lee

    Sega Megalo 410

    If you're interested in replacing the mirror I can provide pics/dimensions of the setup and mounting. One of mine had shattered mirror and I just bought a replacement and cut it to size, my other megalo with a mirror still uses an acrylic mirror so is heaps lighter.
  12. tiff_lee

    Sega Megalo 410

    Yeah I got a schematic sketched out somewhere and I wrote the arduino code but its been on the back burner like everything else for ages. Trying to find the back and the front? Have the projector facing the rear of the where the glass would be and then set the projector to rear projection mode...
  13. tiff_lee

    FS FS:NEO GEO AES SVC Chaos : SNK vs. Capcom by NCI PRE-ORDER (BOOTLEG)

    That looks awesome gutted I missed this, never heard of this NCI outfit until now some of their previous releases look great as well.
  14. tiff_lee

    Where can I find this socket? What are they even called?

    Offt they are pricey if you buy your standard programmer adaptors xeltek/dataman etc El cheapo, not fancy though uses a cap to hold the IC down...
  15. tiff_lee

    Reverse engineering 161 in 1 cartridge to change Rom games

    After reading some of the posts of here he seems to have a very adversarial attitude. The term 'poison pill' is a bit disingenuous, Razoola made the unibios and had every right to implement some form of protection so others wouldn't rip off his work which he incidentally released for free...
  16. tiff_lee

    Sony PSX Remote Control Not Working

    Neither of your remotes are set to position 1 on that switch which is the default position at time of purchase
  17. tiff_lee

    Sony PSX Remote Control Not Working

    I have a PSX but haven't done anything with it for agessssss, I just downloaded a manual and translated it but it doesn't give too much info on the remotes (from the translation at least) but it looks like your issue may possibly be linked to that switch at the bottom, it seems the remote can be...
  18. tiff_lee

    Special PCB investigation (SCI-repair)

    Good work your perseverance paid off, those Toshiba tmm2063 are notorious for failing. Also good to see the Guru has another website to host all his work i was wondering if he was getting rehosted after iinet (Australian web provider) shut down the customer hosting service it was on before.
  19. tiff_lee

    WTB Namco Noir Bezel and Marquee

    Marquee https://www.jauce.com/auction/l1111611486 the sea mail option really helps on shipping with bulky items, takes ages but its far cheaper
  20. tiff_lee

    Beginner has a small question about the Pandora Box

    Perhaps this will help get you going as a reference, View: https://www.youtube.com/watch?v=2qu84lVA878 there is a comment some way down suggesting it won't work with the 10th anniversary they then reviewed a different trackball they used with the DX, not sure if this one works with 10th...
Back
Top