Search results

Following up on my previous issue. Received my replacement PAL from PA and everything is working great. Thanks for all your help with this great product!

Here is a little update. I've requested a new pal from paradise. Could that be causing the graphic issue? I currently have the original Fpal with a jumper from pin 7 to J17 on the main kit pcb. I just removed and reseated the rom pcb several times thinking that could be the cause of the graphic...

More progress! I pulled the GPal that was included with the kit and replaced it with the original FPal. Now I'm seeing game graphics when I load each game, except for they look like this:

Here are the key writing wires.

I pushed a bit more and was able to get the side attached to the rom pcb down a bit, but I can't get the other side down any more. Does the connector need to be flush in the socket on the large pcb too? Unfortunately it's still doing the same thing where it's a white screen when playing and a...

Ok 4 wires added and gave the rom pcb a push and I have a little progress. I'm still getting the white/gray screen, but when I change games and it's writing the new game, the screen now goes black. Then once the write is finished, the screen reverts back to white/gray.

Here is how it's looking currently.

Unfortunately no, there is no sound or graphics coming though. I also just tried a different A board with the same results.

I've made some progress troubleshooting tonight. First off I tried the board in two other cabs and have had different results. In both of the new cabs the screen displayed a white/gray sold color when powered on. I'm guessing now that the rolling had something to do with the board originally...

Yes, I've tried several games. The kit lcd does what's shown in the video. You can navigate the list of games, select, it writes it, and says now playing...

The A board still works fine (tested with other B boards), and the B board with the kit worked fine previously. I should also mention that I'm not seeing actual game graphics on the screen like you would if your v hold was not set properly, it's just bands of color.

I'm having trouble with my kit and the screen just keeps rolling like the v hold is out of wack. This is what I've tried: -SD card is formatted on a PC with the latest set -Kit is from the latest batch from Paradise -Received what maybe was one of the bad G Pals? Installed it with the pin 9...