Search results

Anyone know if Toukon Retsuden 4 Arcade Edition was ever patched to work on the Net DIMM?

I'm still looking for a NetDimm. Thanks!

Has anyone come across a Naomi 2 acting like this with a NetDimm? I bought this combo from another user on here, but I keep randomly getting these artifacts and had a hard time getting the NetDimm talking to the Pi upon first hookup. I have a New Net City with Toshiba Tri Tube and the original...

Looking for a Naomi NetDimm. Let me know!

Can you point me in the right direction to get those New Net City marquee graphics?

In regards to the standoffs? I mean to screw the main and sub PCB together.

Anyone know the proper sized standoffs for to go between the main and sub pcb? I have a RUN N GUN 2 I want to get mounted properly. Bought it separate from the mainboard, and didn't get the filter PCB, so I ended up cutting traces on the mainboard and running a cable from the sub PCB RGB Output...

Ah, gotcha, is it glued to the PCB or just soldered? It seems to be working well right now, so I may just leave it in the state I have it in.

Do you know somewhere I can source the same JAMMA edge connector that you use on the Jammafier here in the USA? Thanks!

So I decided to try and fix the mess and I was able to clean it up pretty good, but rather than destory the pins by trying to remove them I just tied the lead wires together for now that they soldered to the pins. All 4 pins, top and bottom on 27 and 28 are now grounded. I am kind of OCD, so I...

I've got 2 different A & B boards I tried. Kick Harness appears to be wired correctly based on the pinouts. Well I figured out the problem, looks like whomever I got this from decided to do some modification to the Jammafier to allow Buttons 6 to come from the PCB on the Pandora's Box and is...

Sorry, it was late when I typed this up, reading it back now sounds confusing. So what I have is a new net city cabinet that came with a Pandora’s Box 4 Pink and a Jammafier with tri sync helper. I was told it has the original JVS wiring, which appears correct because of the age of the wiring. I...

Anyone know why my Jammafier 1.6 isn't registering Kick Button 6 when I have it hooked up to either of my CPS2 boards? This is a New Net City Cabinet that had a Pandora's Box 4 installed. The Jammafier shows Button 6 working when I push it on the OLED test screen. However when I go into the CPS2...

Do these work with the CPS2 kick harness and the HAS?

I've got the Capcom CPS2 Street Fighter Zero 2 - Grey / Asia Version A & B boards available if anyone is looking for them. Make me an offer via PM. I think you guys know the going rate for the combo. I'm in the USA, only shipping to USA. Thanks!

If we are going from HAS to Framemeister, do we need just a straight through 8 pin mini DIN cable or do you need cables with this resistor?

Would this be considered a recommended supply for use with the HAS V3.2?

How do we go about placing a order?

If anyone in the USA has a HAS they are looking to part with, please send me a message. Thanks!