Search results

Thanks for all your work! I just updated my Naomi2 bios and tested a bunch of the newly working AW games from Murray's list and so far everything was working flawlessly!

Before trying to reflow I checked all power rails (lots of them for the sb and nb..) I could identify - checked all discrete oszillators, ram clock, pci-clock etc... I checked the whole board many times optically as well as the experienced qa guys - no corroded solders or any other peculiar...

Hey guys, I just want to give an update on the mainboard's status. I asked some guys of the manufacturing and qa department of the company I'm working for and they helped me to reflow the northbridge and southbridge manually but still no difference. Then we also reflowed the cpu socket (though...

Well I do have a oscilloscope - any suggestions what I can measure specifically? (Unfortunately I do not have schematics). Of course I can try to go though all the caps and see if there is a ripple that supposed to be flattend by the cap to detect a faulty one... Concerning your question: I...

I tried heating up the board in some areas (also some capacitors) to see there was any change - but so far I did not find a consistent pattern where it gets better or worse... Yesterday I received the PCI diagnosis card that outputs the power-on self-test codes and gave it a try thought I...

Good thought - just tried if without any change (well - there was a massive noice reduction compaired with the old stock fan :) ). What I'm gonne do next is to use one of these pci-diagnostic cards that will display the codes of the bios during power-on self test etc. and see if I'll get...

My board is clear of dust and dirty - I removed it from the case and it is sitting on a pile of newspapers to have access everywhere. So far I could not identify a bad cap visually (no bended caps, no spillage) on the mainbaord- of course I can not rule out a cap issue completely. The video...

Here is a picture of the cpu of my lindbergh yellow - its a Prescott (SL8JZ). Keep in mind that intel switch it's power specification for 478 when they release the later steppings - this means that 478 boards and cpus must match. I fell in this when I wanted to test my lindbergh board with an...

Hi, I recently bougth a lindbergh yellow and at first it was running fine so that I started to do some software related testing. But the system sometimes froze, than sometimes it did only boot after some attemps and finally did not boot at all. With "not booting" I mean that there is no output...

First of all thank you very much for this great project and I'm glad to hear about all this progress. I already looked through all the code and I might also contribute in the future. Unfortunately this will take some time (might be a couple of month) before I can actually start testing it for I...

Hi, greetings from Germany. As I kid I was very fascinated by these big gaming machines but unfortunately actual Arcades were/are very rare in Germany. So it was always thrilling to find a Arcade machine somewhere (in an hotel, museum ..) and give it a try. Now I'm planung my own setup and...