Search results for query: *

Not game-breaking by any means since this has been on the back-burner since December. Can consider one sold here when you get them :D

:S Figures! Am I correct in thinking the custom cannot run 4rd strike / palmod versions? Last I saw you had 3 left but I'm assuming those have been sold.

Security bolts were griefing me yesterday. I'm assuming this to be standard & should be OK but I'm basing that off the previous pictures. The ones with additional wiring on the back are the only clear giveaways to me so please correct me if that's wrong :)

My sister finally visited & brought the UltraSimms I ordered last year up :D I'm not sure what's in the cartridge I have but given I haven't used the Proman before, I figure there's no harm in trying the standard SH2 set and seeing what loads up. Worst case it sounds like I wind up reflashing...

A friend of mine & I have been trading full tune ID3 cards between Demul<->Flycast<->YACardEmu which should confirm compatability on those. The default card emulator w/WiFiPi has some extra characters (215 vs 207 I think?) in the card so I wasn't able to get that one aligned. I'm expecting to...

Could I ask what the fuse size/rating is for the 400-5397-01? I managed to get enough power through the one I have to get some noise out of it (and a blown fuse). I still have a second transistor to replace but it's taking forever to get here. .... and who'd have thought it was right on the...

This was ultimately resolved by methods I'm still not sure of. I did some additional board swaps, and ultimately had 2-3 quarter mech wires get knocked loose. Given I was working on other games, I eventually plugged the Taito F3 back in w/the old Puzzle Bobble 2 and got a 'SERVICE SW ERROR'...

I got it running last night & my PIN's arrived today from digikey, so I can confirm the WiFiPi - YACardEmu ran flawlessly for 3-4 hours. I set it up on ports 8080/8081 & used a different port for each side. I needed to bump up the partition size for the 3rd party libraries which took a while...

Will follow up w/you on getting these. I had the monitors on hiatus given they were in non-operational circumstances but have been getting caught up :)

Oh .. That explains it. Both scripts have their ins & outs but the WMMT doesn't appear to have the PID kill & has some extra stuff for additional ports. I'm pretty sure I ran the emulator multiple times when I bricked the card. By bricked, I mean the card file became 0 bytes after the game...

Lots of progress over the last week. Both sides are operational now & I wired up the 2nd card reader. I fought the netdimm a little and seems I'll need to replace the PIC to get the 2nd netboot running 100%. Concerning the 2nd USB -- the emulator w/WiFiPi doesn't seem to support multiple...

I now officially have another time eater available to interfere with progress on various things. The second one on the right is working minus the card emulator wiring, but still needs the monitor/cage brought down the stairs. Much appreciated for everyone's help.

8o Awwwwesome. I finally got the monitor mounted back on the first twin. No cards to play with so I'll be looking to get this running over the weekend! Thanks very much!

I received some new Sandisk SDcards today & reimaged them. I took a video of whats happening & compressed it but server won't take it at 10mb -- I can put it on youtube if that's any help. - Have confirmed voltage at 5.08v - New & reimaged sdcard - Confirmed the Taito F3 works w/the old Puzzle...

I had a few games in storage and have been checking them over now that my games are back up & running. The Taito F3 Multi went a bit haywire on me -- specifically the test button stopped working. Any suggestions on what button I'd replace it with? Planning on ordering a couple of pots for...

Plus+1 on the netdimm recommendation. Saves you from having to swap the carts too given the amount of problems that can be caused by it. I've got a pair of classic carts that came with my setup but intend to switch 100% over to a netdimm setup once I get everything up and running.

I've made some recent attempts to resurrect one of the two PSU's in my ID3 cab with no success. - Recently replaced all the caps & followed w/solder joints confirmation vs the working one. There was one broken trace that had been previously repaired & looks good. - Fuse is OK - Some continuity...

Sending you a message for some of these as well :thumbsup:

I've got one board w/a battery assploded DL-1927, so confirm me for one. I need to find where I stored my security bits to check the other.

I've since found 1 or 2 "ghost cables" that go nowhere since my initial review, so I take your point ^^ I did map them out enough to take the adventure (Pins 1-6 were the power wires - 12V 1 & 2, 5V on 5 - and 7-12 being RTS, RXD, TXD, GND, CTS, GND) but think I'll concede and get the...