Search results for query: *

Then it may have a chance. It's hard to see how much space is available. Anyway if it fits, tape the back of the BlueSCSI to be sure no CC happens. Also, I usually ship same day but I'm out of microSD card ! You can still contact my and book for a board, but expect a short delay in shipping...

It 100% won't fit because of the HDMI mod. Sorry. Another version of the board will be required.

You can get this bios from another card. The ES3 share only 2 bios versions: one for "green marked" cards and the other for the "no marking". They are both very early releases, very close in term of version. About TC5: every TC5 die within a few years. At this level I start to believe we can...

Do you have pictures of it ?

Yes. For everyone: send MP if you want them. It's better because this way I know what I red or not ;)

@shadowblind @plasticfactory

Hi, I have some board available to ship right now. If you want one or more, send me a pm so we can calculate shipping fees. @mike hancho @RoseCity__

Positive feedback for this great buyer. Thanks :)

I check CC on this powered off GAL (multi unplugged from mother board). Pins 3 and 24 are connected to VCC (normal for 24). Pins 12 and 13 are connected to GND (normal for 12). Pins 11 and 14 are connected. Is anything wrong ?

Yes, it almost blistering hot and causes graphical/sound issues. I checked the addresses traces between rom 1/3. Also the traces that are next the borders of the pcb. Is there other things to check on v1 ?

Oh they are the same as original romboard ? Are you sure ? The PLD is a GAL22V10 on the multi., a 24 pins device. The original seems to be a GAL18V10, 20 pins device.

Thanks a lot for the help. The board may have been over voltaged (does this verb exists ? :D ), so it's possible the gal had a bad time. How to replace the gal ? I can program them but is the jed file available ?

Hi, I got a Multi v1 with graphical issues. The GAL at U18 getting really hot, is this normal ? Thanks for your help

You're right. It works great with Jasen's. It doesn't work with capcom box. I'll build a version for those box later

Most probably a shortcut on a diode, capacitor or a MOSFET. I didn't check yet

Someone share me a picture and I confirm this won't fit. Maybe I'll create a special version for it, who knows.

Shipping to: - France is 5€ - most European countries is between 5€ and 12€ - UK is 19€ - USA is 35€ - Canada is 35€

Yes, but it's kind of expensive (and you'll be taxed ...). It's like 35€ for 1 to 10 boards.

Hi ! I’ve adapted Eric Helgeson’s BlueSCSI board to snap directly onto the back of a CPS3 mainboard - no ribbon cable needed. This fully replaces the original CD-ROM reader and can be used to flash games, boot games, etc., just like the original drive. The SD card stores the ISO images, and...

Last weekend we had a big event in France: https://summer.hfsplay.fr/ The Street 3.3 running on stage for tournament was using this exact board :)