Search results

  1. SMFK

    PVM Image Waving Issue Exclusively with Supergun

    Quick update! I did remove the ground plug from the Meanwell and all of the distortions stopped. Thank you so much for helping me with this! I feel a little concerned not having the power supply grounded, but it is going into a Furman power conditioner so hypothetically it should be good for now?
  2. SMFK

    PVM Image Waving Issue Exclusively with Supergun

    Thank you so much for your response! I will definitely pick up the terminators because they are cheap insurance! As for the Mains Isolation Transformer, could you give me a better idea of what this is and how it can be integrated? Thank you again for all of your help!
  3. SMFK

    PVM Image Waving Issue Exclusively with Supergun

    Hello! I have been having image issues when connecting my MiniGun supergun to my Sony PVM. I get an odd wavy image exclusively when using my supergun, all other RGB consoles appear perfectly on this Television. I'm not running it thru a Scart Switcher, but directly into the BNC breakout from...
  4. SMFK

    MVS MV1FS Sound issues

    Well, I flipped it over and cleaned it with iso and the volume pot, I then hooked it to better audio equipment. I'm not sure if the cleaning or the equipment switch worked (I've heard that some audio equipment can affect voltage) but it now appears to be working. Thank you for your reply!
  5. SMFK

    MVS MV1FS Sound issues

    I bought a MV1FS off ebay a few weeks ago and it just a few days ago. It was ugly but appeared to work fine and came with KOF 97. After messing with KOF and the 161 in 1 for awhile I notice the sound would get really quiet, then come back or distort. This appears to happen after a few minutes...
  6. SMFK

    Mean Well QP-200-3A Setup

    What do you think would be a safe gauge? Would most of the out of the box connectors be safe for this?
  7. SMFK

    Mean Well QP-200-3A Setup

    Thank you for the reply, could you expound on this? I thought it would be unsafe to run multiple wires from the fork terminals on the PSU.
  8. SMFK

    Mean Well QP-200-3A Setup

    I believe I found the answer to my own question but I really had to dig. It appears I will require TWO separate PSUs. One for the Naomi board itself (Mean Well QP-200-3A) and another to power the supergun (Mean Well RT-65A?). It might be a good idea to make this more obvious in the NetDimm...
  9. SMFK

    Mean Well QP-200-3A Setup

    I've been assembling all the parts for a NetDimm setup and have already bought a Minigun supergun and a Mean Well QP-200-3A PSU. I cannot find any pictures on how to interface this PSU with both the main board and the supergun and everything I read says I cannot use the I/O board to jump the...
  10. SMFK

    Best PSU to pair with Naomi + NetDimm

    Could you post a picture of how you set all of this up? I just bought a minigun supergun and the Meanwell QP-200-3A but I dont know how to you are supposed to setup the power to both the supergun and naomi at the sametime. Forgive me, I'm VERY new at this.
Back
Top