Search results

I upgrade the Celeron3.2 to P4 3.4, a lot of games became playable.

Thanks to all the guys!

Thanks. It works with the test button on my supergun.

And how to enter the test menu of each ttx2 game？

I just bought a brand new ttx2 with the model 105A. （graphic card is 7900gs,Cpu Cel3.2g，ram 2gb.)Bellow are my questions: 1.As I read the threads and studied u can adjust the 480p to 720p through dip switch on IO panel. However my 105A has no dip switch at all（it seems only has a reset button on...

Especially thanks to @Frank_fjs ,who helped me alot during the project.

Thanks so much for this project, it is really beautiful converter. I also want to share my experience during building this project. 1. Firstly, I adopted the 328P Au chip with 16mhz exterior crystal firmware(It was not a virgin chip ).I rewrote the 8mhz firmware with extreme burner(need to wire...

The issue was solved. Cause I made a multidefinition mistake.

when I try to upload the file to my arduino UNO, Arduino IDE said "collect2.exe: error: ld returned 1 exit status".

Thanks a lot，I will try tonight and update the test results.

If I want to build this converter by uno，usb host shield&breadboard，do I need to buy other parts like capacitor and risstor？Can you share the schematic of uno built system？ Thank a lot！

I will try with my TTX2 after you updating the codes. Thank! By the way，the button layout of iona346 (x y z kick，a b c punch)is different from the capcom street fighter recommended layout(x y z punch，a b c kick). Would you please teach me how to modify the code(I am have no idea about this:( )...

I downloaded the iona346 project，and it works well with my Saturn joypad. It still works， Even I did not connect the capacitor and risistor.

This issue solved.

Update，I found actually only the coin button unavailable. The other bottoms are all ok in naomi games. I guess the problem May from the test mode setting，but I am not sure about it.

Does anyone have a similar issue？

I use both 98701-3 io board and jvs to psx converter. Game: CVS2 and SFA3 upper.

Solved，the issue came from the program of jvs converter. After updaing of firmware，the issue will be fixed. This issue sometimes happen. In jvs test mode，all buttons can be recognized. But in naomi games，no button can be used. However，everything is all right in AW games. Does anyone have...

update high quality photo

I upload this project to my uno and connected all the pins and components，but still doesn't work on my naomi 2. ?(