Search results

I ended up getting rid of the boards. :(

I’m not at home right now, but IIRC, it is the display button.

You need to have the remote control to turn off the overlay. :( I have a remote control -- if I can "scan" the IR codes I could post them. anyone know how to do that?

Guess the price was right! SOLD! I've had these 2 Neo Geo AES controllers in storage for a while. I use to have a NGCD and bought these for that console. Controllers worked fine. I sold the NGCD about 2 years ago and forgot I still had these! Anyway, looking to sell both together. One is...

What a dummy, I didn't post a price. Looking at $500 for the whole kit.

Cleaning out the last of my X68000 spare parts... Up for sale is a working Sharp CZ-613D (BK) complete with tilt/swivel stand, remote control, and side-mounted speakers (in TN color, not BK, but match very close). Will also include the AV cable to connect monitor to your X68k. Monitor tested...

SOLD! Up for sale is a turnkey light gun setup: 2 Sinden light guns with recoil Raspberry Pi 4 with 64GB SD card that has Batocera with NES, SNES, Genesis, Master System, Naomi, Atomiswave, Dreamcast, PSX, and arcade (MAME and FB Neo) light gun games Power supply for Pi 4 Plug this into any...

SOLD to meybarra Up for sale is an OG XBOX console modded with the Aladdin mod chip and Cerbios. XBOX has been fully serviced: disassembled, plastics cleaned thoroughly, super cap removed, motherboard inspected and cleaned, CPU and GPU re-pasted, Aladdin XT mod chip installed and flashed with...

Anyone interested in an almost new, complete in box Sony PlayStation VR2 for the PS5? I bought one for my son a few months ago on a whim thinking he might want VR for his PS5, but nope, he's all in on the Oculus Rift for his PC. So, I have this PS VR2 that has been used for less than 10 minutes...

I had a similar issue with my Blast PSU and I did what Derick2k suggested above. After a recap, I reflowed every solder joint even if it was shiny, then I cleaned the connectors with IPA and then used deoxit before plugging everything back together. After that, solid every time. Good luck!

Very cool! Curious to hear more about this as I am in Seattle!

PM'd

"SOLD" I've had this Blast City instruction space glass sitting around for a long time and really don't need it. It's not cracked or anything, but does have the "paint" on the ends worn clean off. So it's just a piece of glass now. Anyway, if someone can use this, you can have it for free +...

Capcom Cute kits now available? Incoming PM! :)

I'm in Seattle and interested. PM incoming.

Quick update, buttons and sticks are in and wired up except for the kick harness. Need to get something going for that...but it works great and hope to play a game of Alien vs. Predator tonight with the kiddo.

Ya, maybe I'm not remembering correctly. I just fired up my RGB-Pi and with the USB drive in, you need to go into Storage you should see USB1 and USB2. \ select USB1 to mount the drive first then scan for games.

you have to format the USB drive using RGB-Pi OS. I forget exactly where it is -- maybe under the ROM scanner -- there is an option to prep the USB drive. then move it back to your PC/Mac and load your ROMs. then plug it back into the Pi.

Bunch 'o free stuff. Hopefully someone wants it all or most of it. 2 speakers from an Astro City. Working fine, just replaced mine with "upgraded speakers". SOLD to kyletwentytwo 2 4", 4ohm, 15 watt speakers bought to replace the tired ones in a Capcom Mini Cute. 1 came bent, so the seller is...

Here is where I am today and what I have done: Full scrub down inside and out. Removed rust with wire brush and vinegar. Sealed the bare metal with primer and paint. Most of the outside was in pretty good condition; I'm not going to repaint the cabinet or replace the artwork. I like the small...