capacitor

  1. NFGx

    Capacitor leaks in Astro City 400-5261X PSU

    Probably nothing many of you haven't seen before, but I thought I'd re-cap my Astro City PSU before it started giving me any grief. And it's probably a good thing I did. Though the PSU seemed to be working fine, there was more leakage under the six large caps than on anything I've ever worked...
  2. Matan

    Sega Y-Board - Rail Chase capacitor trace question

    Hi all, I have the rail chase board and I’ve noticed that capacitor C8 suffered some stress and was pushed down from its position. As a result, the traces below are now damaged. I flipped the board and could not find the traces rout to try to correct it. Does anyone have a clue of where to each...
  3. R

    Namco System 11/Tekken 2 - This means bad caps, right?

    Hey, everyone. Just stumbled upon this forum, and looking forward to learning a lot. Mostly out of impulse and curiosity, I just purchased a Tekken 2 arcade PCB from an online store I use frequently. They've been around for a while and are well-established, but this is the first time I've seen...
  4. R

    Atomic Punk PCB radio over speakers

    Hi everyone, I just got myself an Atomic Punk Global Quest and when I connect it to my Blast City, there is some radio broadcast being picked up. Has anyone seen this issue before? Any solutions to this? Here is a video of the issue: https://photos.app.goo.gl/rrrKQ1Y39yivP3tq9 It seems to...
  5. B

    Random capacitor on my M72 board

    I've just recapped my M72 and as I was reassembling everything, I spotted this half-attached ceramic capacitor straddling pins 10 & 11 on IC13 on the middle B board: I initially thought it was from me flipping the board over when I was swapping over the electrolytic capacitors so I scolded...
  6. kazuo

    MV1C Issues - Random Reset, Exploded Cap (!) After Recap

    Hey everyone, Looks like I somehow ended up with the MV1C from hell. Had this thing for years, and it only recently began exhibiting problems: Random resets. To be clear, the random resets were happening before I attempted the recap. This seems to happen more frequently when using flash carts...
  7. SmokeMonster

    CPS2 A Board - Recap

    My desoldering station arrived and I put it to the test with a full shotgun recap of the CPS-2 A Board that I use with my Darksoft Multi. The station made quick work of what would have been a daunting task using a solder sucker. Capcom used excellent Panasonic caps to begin with, and there was...
Back
Top