ImportantBet
Grand Master
.
Last edited:
WTB .
- Thread starter ImportantBet
- Start date
Want To Buy
West
Grand Master
Battlesmurf
Grand Master
DM me (with your address and such)- I do reproductions of the brackets. Thanks!
Cereth
Legendary
I do have 'em but I'm in Japan until April, shutting down requests
Battlesmurf
Grand Master
All good! FYI- Taito had them. Good luck with the hunt
These are original Japanese locks & keys: https://a.aliexpress.com/_mPdOGG2
Battlesmurf
Grand Master
I offer the option usually. With Alberto's workload lately, I know I'll be able to produce more before he can- but likely he might come out a little cheaper .
I'm due to make another batch though. Skipping powder coating saves about $10-30 depending on how much stuff I bring to the powder coaters at once.
IIRC if Taito has any- they're something goofy like 3-400 a set.
I'm due to make another batch though. Skipping powder coating saves about $10-30 depending on how much stuff I bring to the powder coaters at once.
IIRC if Taito has any- they're something goofy like 3-400 a set.
themisterfalcon
Grand Master
Same brand (First) but I don't see any LY1153 markings on them.
Can someone confirm if they are keyed with that code?
They are also all "single" barrel locks. Egret 2 spec is:
- 2x LY-1153 Double Locks for the control panel housing
- 1x LY-1153 Single Lock for the PCB door
- 1x LY-1153 Single Lock for the service door
- 1x "Alpha Z-Lock" (aka dimple key lock) for the coin box
themisterfalcon
Grand Master
FIRST definitely makes the locks in a variety of keyings (is that the correct term? lol).
I have a Ziploc full of non-1153s that I have taken out of my Egrets over the years.
Is it US $8.68 (+ shipping) for a single lock or for the full set of 5+ 2 keys?
themisterfalcon
Grand Master
Thanks for confirming. Interested to see what you end up getting.
I'll take photos of the ones I got tomorrow. Definitely would like to hear your expect opinion @themisterfalcon.
The seller swore they were the exact model used on the Egret 2, I haven't fitted them in yet, so unsure what the outcome will be.
I think they were around $35 USD for a set of 5 locks, and he gave me three keys.
The seller swore they were the exact model used on the Egret 2, I haven't fitted them in yet, so unsure what the outcome will be.
I think they were around $35 USD for a set of 5 locks, and he gave me three keys.
themisterfalcon
Grand Master
Sure keep me posted. The model IS identical, but they keying is maybe different? I have had LY1154s, and other "First" locks the same shape but other keying. Totally fine, they work and are in spec. I just find having different locks for different cabs of the same type (read: all Taito) to get tedious!
All my Taito cabs have 1153 and all my Sega cabs have 5380.
Elfito69
Student
I got 2 locks and 3 keys if you still looking
DangerousDad
Student
@djsheep @ImportantBet do you know if the locks listed on that AliExpress page would fit like an LY1153 lock? Looking for some for a Vewlix.